0
You need a 60 amp breaker.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
50 amp breaker needs what wire size?
6 AWG wire
What is the gauge of 0.163 wire?
The nearest wire size is #6 AWG which is .162023.
What is larger 6 AWG or 4 AWG?
4 Gauge wire is larger in diameter than 6 Gauge wire.
What size of wire use if you have 6 outlet with 30 amp breaker?
It is unusual to have multiple outlets on a 30 Amp service. If you do this you need outlets rated at 30 amps and 10 AWG wire.
Size wire for 12 volt dc 200 amp 8 ft length?
minimum gauge is 6 and the best is 4
How big is 6 gauge wire?
The size of the wire is stated by its gauge under American Wire Gauge. Six gauge wire is size 6 AWG.
What gauge wire should be used with a 60amp circuit breaker?
Use AWG # 6 wire.
What size wire do you need to wire a 200 am breaker box?
6
50 amp breaker needs what wire size?
6 AWG wire
What size breaker do you need for a Whirlpool 4 cycle dryer?
It should take a two pole (220V) 50 amp breaker and matching plug wired with # 8 or # 6 gauge wire. Check your manual.
What is the gauge of 0.163 wire?
The nearest wire size is #6 AWG which is .162023.
What size breaker should be used for a double oven?
50 amp breaker wired with AWG # 6 wire.
What size of main and wire if the total load is 50.98amp?
6 gauge
Can you run 14 gauge wire off 12 gauge 20 amp breaker?
You could if it fit properly in the connector, but it would be massive overkill since you only need 12 AWG wire. You also have to make sure the load can physically accommodate that larger size wire. Every so often someone will replace an electric cooktop witha gas one. All of the new gas cooktops require a 110v outlet. The old electric cooktop may have been run with a 50 amp breaker (and probably 6 gauge wire) In order to convert this 220 v circuit to a 110v circuit we change to a 20amp breaker. Depending upon the brand of breaker sometimes the wire will fit into it. If not, we splice on a short piece of 12 gauge wire and then connect to the breaker.
What size wire for 75 feet of wire for a 30 amp 220 volt oven?
A 30 amp breaker run 75 feet would require you use AWG #10 wire. But, an oven normally pulls more that 30 amps and I would not use #10 wire on a 30 amp breaker for an oven. Normally any newer oven is wired with AWG #6 gauge wire on a 50 amp circuit breaker so the breaker will not trip during heavy use of the oven. Some older ovens could use a #8 wire on a 40 amp breaker.
Is a 6 gauge wire larger than a 12 gauge wire?
Yes, the smaller gauge number, the larger the wire is.
What gauge wire is required to hook up an electric kitchen stove?
Normally a new kitchen stove will require a 50 amp breaker wired with AWG # 6/3 with ground wire.
