timing marks should be on the harmonic balance.above harmonic balance should be a a flat metal pointer. the edge of this pointer will lign up with marks when being timed
The timing marks, on your 1992 Toyota, are located on the main engine pulley. The timing marks can be found around the perimeter of the pulley.
No need for timing marks on the outside of the engine that has no adjustable ignition timing.(DIS)
The timing marks can be found on the flywheel and the front pulley on the front of the engine. The timing marks indicate when a certain piston is at its top stroke.
Where are the timing marks on a 1992 Toyota Paseo 16 efi 1.5 liter engine?
The timing marks on a 1992 Toyota Camry 4sfe are timing belt replacement marks.
Both the crank and cam sprockets have timing marks on the sprocket and on the engine. As you face the front of the engine, with the sprockets in front of you, the cam timing mark is approx. 85 degrees right of top center. The crank mark is approx. 10-15 degrees right of top center (piston #1 should be top dead center). Line marks on sprockets with timing marks on block (tin), slip on belt and tighten tensioner. Manually rotate engine 2 complete revolutions and check that both marks are still aligned.
Get a manual on your car, It will have pictures and everything,.
The timing marks on a 1992 Hyundai 1.5 are lined up by placing the indicators on the cam sprocket and crankshaft sprocket across from each other. This sets the initial timing which determines which determines the synchronization between the engine's internals.
Field service manual specifies 20 degrees btdc + or - 2 degrees
The timing on a 1992 K1500 pick up 5.7 should be lined up to the timing marks with a timing light to 0BTC, then shut down the engine and reconnect the timing connector before restarting again.
Get the Haynes manual for the unit, they have a good, detailed diagram on aligning the timing marks on the timing gears being turned by a chain. There is no belt on this engine.
On the crankshaft pulley