this is the year 2004 technology is high great debate has risen chances are great that the valvolive filter you have is not the highest quality a good filter is cheap insurance especially when you consider the cost to replace an engine upwards of 1/2 of original new car price. wix and napa gold are two favorites. MDofPerth: The Valvoline VO5 Oil Filter is suitable for most Hyundai Excels (and some other models such as Sonata) in the 1990s. There is a plastic service cover that partially hides the oil filter from access. Jackin gup the front right corner of the car and removing the three most visible bolts from that cover (then tilting the cover down) makes access to and draining of the old filter easier than reaching round the back. Don't forget to pre-fill the new filter with clean oil, and lubricate the rubber seal, before screwing the new filter into position (hand tight).
To get the radio code for the Hyundai Excel you need to request it from Hyundai.
They can easily be attained from redbook. You can get al the inormation you need from You can find the specifications of a Hyundai Excel from there. Find it there
Try a Ryco Z79A
With a filter change it will need 5 quarts, I prefer Valvoline.
I had the same problem with a Hyundai Accent 1996. You need to disconnect the speedometer inside the front hood.
The front brakes and rotors on a 92 Hyundai excel need to function properly to insure that the car stops quickly. A front brake problem can cause an accident or personal injury.
Google iit using keywords 1999 Hyundai (size of engine) vacuum hose routing
The fuel filter, is located inside of the gas tank. You will need to drain the fuel from the gas tank in order to change the fuel filter.
There is no fuel filter except in the fuel motor inside the tank. You don't need to change fuel filter in this model.
you need to bleed your clutch fluid
The fuel filter on a Hyundai excel is located behind and to the left of the manifold and air intake, its a small cylindrical object with two hoses attached to it, one on the bottom and one on the top. Its fairly simple to change it, providing you have a new and correct type of fuel filter to replace it with. You'll need a socket wrench and a spanner, attach the spanner to the bottom bolt to prevent it from spinning while you take the socket wrench to the top bolt. Once you have the top bolt off, repeat for the bottom bolt, remove the filter from its bracket, and replace with the newer one, making sure you attach the top hose to the top part of the filter and the lower hose to the bottom part of the filter. This process can be a pain if the bolts are done up REALLY tightly like they were on my '91 excel.
You do not really query in excel. If you need to do a lot of queries, use a database. However, you can replicate the effect by using the filter option. Highlight a column and turn on the filter, then select the item you would like to see.