I wouldn't do it. Tar paper between subfloor and finish floor is a good technique, but gluing tiles directly to a tar paper surface is not a good idea.
If they are ceramic tiles and this is the adhesive used to bond them, instructions will be on the container.
Green screed by BAL
they are new vinyl strips with wood textured surface and adhesive backing for easy installation. please advice if it is applicable to the mosaic floors and will not bubble up due to moist underneath when the room temperature is low.
One can buy garage floor tiles at Home Depot whether in store or online. Another option would be to purchase it online at Rubber Flooring or American Garage Floor.
You " CAN ", but it is not advisable!AnswerSand the painted area so that it is rough. Then the adhesive will work better.
You could but it's not advisableWall tile adhesive is thicker so it won't run down the wall and the tiles are less likely to slipANS 2 - I have done this a few times. If you use tile spacers, no problem.
Tiles used on floors tend to be thicker than wall tiles. Also, floor tiles are subjected to flexing as people walk over them. Therefore, if floor tiling a wooden floor, use a flexible cement adhesive and grout designed to give and take without cracking.
There is no good reason why floor tiles should be 1 foot. It's just the way the tessellation was designed by the person who made the tiles.
You can't: unless they're very thick, most tiles will just break. The best you can do is use a thick base layer of new adhesive to cope with the irregularity of the old adhesive.
There are many kinds of tile adhesive and you don't specify which . However most are basically of two kinds - Very fine Portland cement with additives, used mainly for stone or ceramic floor tiles and a type of modified latex for ceramic wall tiles.
it depends on how you throw it
It is called Mastic. It is the adhesive that used to be used for floor tiles. Warning: Most mastic contains asbestos