0
What three things are needed to make a complete electrical circuit?
Wiki User
∙ 14y ago
The first part is that you need a power source. The second thing is that you need a load. The third thing is that you need the power cables.
Wiki User
∙ 9y ago
Wiki User
∙ 14y agoA supply of power, a load to use the power and a means of connecting the supply and the load together.
For example:
1. battery
2. lightbulb
3. wires
Wiki User
∙ 9y agoThere are at least 3 main parts required for every electric circuit. You need a power source, a conducting path, and a load.
Wiki User
∙ 13y agoThe three most important components for a circuit to have is a battery/cell, bulb and switch.
Wiki User
∙ 13y agoElectric cell, two cell battery, switch.
Wiki User
∙ 14y agoResistor, Capacitor and inductor........
Wiki User
∙ 8y agoPower source conducting path and a load
Add your answer:
Earn +20 pts
What do you need to build a circuit?
The things needed to build a circuit are:Circuit elements like resistor capacitors, inductors etcConnectors (cables)A source
A complete electric circuit includes a voltage source current wires and something to ground the flow of current?
If you ground the flow of current like the last part of your question states you will not have a complete circuit as the circuit will open on a short circuit. To make a complete circuit operate you need a power source, an overload device to protect the conductors of the circuit, conductors to carry the current and a load across the power source which causes the current to flow in the circuit. Leave any one of these things out and you will not have a complete circuit.
Why are amplifiers needed in electronic circuits?
An electrical circuit is used to guide electricity through a path. This is used because when electricity is guided to various things it can power them.Anything that uses electricity.It's called a circuit because the electrons have to circulate back to where they came from.A battery has two poles. The circuit is only complete when both terminals are connected via the device(s) driven.A generator has two poles from the coil inside. Electricity can only flow when both ends of the coil are attached.
What are three components needed for a circuit to work?
Three things that are needed to have an operating electrical circuit are: 1. Electric potential difference or voltage. 2. Conductive path, which allows the movement of charges such as wire. 3. Resistor, which acts as an electrical resistance and loosely defines any object that uses electricity to do work.
What happens when there is to much current in a circuit?
If you are talking about the circuits load being to large for the circuits capacity, then the circuits over current or over load protection will come into effect. The fault will open the circuit, thereby isolating the load from the electrical supply source.
What things need a electrical circuit?
Electrical devices need an electrical circuit.
What are two things required to make electric current flow in a circuit?
you need an electrical supply and a load. nice and simple.
What does curcuit mean?
A circuit is a complete loop that things can travel around. There are electrical circuits that electrons travel around, and race car circuits around a racetrack, for example.
A complete circuit is made of three things?
If you are talking about the light circuit then : The Battery, The bulb and the wire.
What happened to the electrodes as a result of the electric current flowing?
Several things happened to the electrodes as a result of the electric current flowing. The electrodes conduct the electrical current and makes the circuit complete.
What four things are needed to complete an electric circuit?
The four elements of a complete (electrical) circuit: 1)A source of input (power supply) 2)A means of conductivity (usually wire) 3)A means by which to open and close the circuit (a switch) 4)An output device (motor, light bulb, etc)
3 things in a complete circuit?
battery, wire, and light bulb
What are to things needed in order for current to flow in a circuit?
voltage and ground
What two things are needed to make a current flow in a circuit?
For the circuit to be connected all the way round because if there are breaks in the circuit the electricity will not flow back round. and number 2 a battery or a power source because without power where is the electricity coming from to be honest. Hope it helped. Thanks. xx
What are the two things needed to make current flow in electricity?
A flow of electrons is needed to have a current. And there (usually) must be a complete circuit. And you need a voltage to make the current move around your circuit. All tied up in Ohms Law - which I'll leave to you.
What things are needed for a circuit?
A source of power, a load, and some wire to connect them together.
What do you need to build a circuit?
The things needed to build a circuit are:Circuit elements like resistor capacitors, inductors etcConnectors (cables)A source
