0
1. Measuring tools example : ruler
2. Cutting tools example: scissors
3. Drafting tools example: Tailor's square
4. Marking tools example: Tailor's Chalk
5. Sewing tools example: Needles
Wiki User
∙ 10y ago
Wiki User
∙ 11y agotool is a device to help even out the effort you put in necessary place and equipment is a device that you cant carry alone...
Wiki User
∙ 11y agolove u
Wiki User
∙ 10y agoHem Marker
Ruler
Seam gauge
Tape Measure
Answer two:
Sewing tools are generally classified by the task they are designed for. You will start your project with the marking and measuring tools, next the cutting tools, now the sewing tools, and finally the finishing tools.
So the four categories are marking/measuring; cutting; sewing; finishing
For more information see this source: http://msucares.com/pubs/publications/p1302.htm
An Ediza Jorin
Answer
Measuring
Cuffing
Spinning
Marking
Amie Jammeh
Measuring, stitching, drafting , cutting, marking
Anonymous
1.Measuring Tools
2.Cutting Tools
3.Marking Tools
4.Drafting Tools
5.Pinning Tools
Anonymous
Sewing tools are used to
Anonymous
Scissors
Anonymous
Add your answer:
Earn +20 pts
How much would your singer au52-16-5 sewing machine be worth?
how much is a singer sewing machine worth, serial no. G 0759386
What are the 5 examples of Modern Technology?
mobiles,laptops,cars,computers,artificail intelligence
How do you remove vectra gearbox?
With difficulty it takes a professional mechanic with all the tools about 5 and a half hours, if you try and do it at home it will take longer. it would be very much worth buying the proper Haynes manual.
Why would a sewing machine fail to pick up the bobbin thread?
1. Unwind about 3 or 4 inches of thread from the bobbin. Insert wound bobbin into bobbin case. 2. Pull trailing thread into the slot of case. 3. Pull thread to the left under the tension spring until thread enters into delivery eye. 4. Holding bobbin case latch with the metal finer of case pointing up, fit it into the notch at the top of the shuttle race. 5. Release latch and push case back making sure the case is in the proper position. Close slide plate. Note: The thread drawn out of the case is to be left hanging below the race. Leave about 5-6 inches of thread hanging. If this doesn't fix your problem, your machine (made by Brother) may need tuning because the needle isn't in the proper position as the hook comes around to catch the bobbin thread. A repairman that can fix a Brother, Kenmore or Singer will be familiar with this machine.
What is the standard allowed minutes for the basic denim trouser i.e how much time a skilled sewing worker in general takes to make a basic denim trouser in a factory?
the standard allowed minutes for the 5 pkt jeans is 12 to 17 minutes based on the skill of the operators and the types of specialized machines used Dhan
What are the 5 classification of tools and equipment?
1. Measuring tools example : ruler 2. Cutting tools example: scissors 3. Drafting tools example: Tailor's square 4. Marking tools example: Tailor's Chalk 5. Sewing tools example: Needles
How will you keep your tools and equipment safe and functional?
1.Boil 2.Disinfect 3.Sterilize 4.Store 5.Inspect
Is warranty for electric equipment like Pro tools digidesign 5 years?
No, the standard warranty that is available with Pro Tools Digi Design is not five years, but two years.
What are the 5 classification of Preposition?
CORRECTED: in, to, for, of, if........ there are no classifications for preposition
How many climate regions are there in Koeppen's classifications?
5
What are 5 classifications for hurricanes?
Class 1, 2, 3, 4 and 5 hurricanes
How much does sewing machine lubricant cost?
Sewing machine lubricant (oil) is usually between $5 and $10, depending on the brand and the size. A small (under 5 oz.) bottle of sewing machine oil at your local sewing supplies store (such as JoAnn's) costs about $4.
Is the common cold congenital?
list me 5 classifications of pathogenic organisms
What are the different classifications of appetizers?
There are actually 5 classifications of appetizers. They are deep fried appetizers, steamed appetizers, canapes appetizers, grilled and fresh fruit appetizers.
What are the 6 different classifications of appetizers?
There are actually 5 classifications of appetizers. They are deep fried appetizers, steamed appetizers, canapes appetizers, grilled and fresh fruit appetizers.
What are the release dates for Cool Tools - 2007 Safety Tools 8-5?
Cool Tools - 2007 Safety Tools 8-5 was released on: USA: 2011
How much would your singer au52-16-5 sewing machine be worth?
how much is a singer sewing machine worth, serial no. G 0759386
