Top Answer
User Avatar
Wiki User
2010-06-16 14:01:47
2010-06-16 14:01:47
Advantages of a Tree Topology
  • Point-to-point wiring for individual segments.
  • Supported by several hardware and software venders.
Disadvantages of a Tree Topology
  • Overall length of each segment is limited by the type of cabling used.
  • If the backbone line breaks, the entire segment goes down.
  • More difficult to configure and wire than other topologies.
Advantages of a Linear Bus Topology
  • Easy to connect a computer or peripheral to a linear bus.
  • Requires less cable length than a star topology.
Disadvantages of a Linear Bus Topology
  • Entire network shuts down if there is a break in the main cable.
  • Terminators are required at both ends of the backbone cable.
  • Difficult to identify the problem if the entire network shuts down.
  • Not meant to be used as a stand-alone solution in a large building.
  • It is slower than the other topologies
Advantages of a Ring Topology
  • Data packets travel at great speed
  • No collisions
  • Easier to fault find
  • No terminators required
Disadvantages of a Ring Topology
  • Requires more cable than a bus
  • A break in the ring will bring it down
  • Not as common as the bus - less devices available
Advantages of a Star Topology
  • Easy to install and wire.
  • No disruptions to the network when connecting or removing devices.
  • Easy to detect faults and to remove parts.
Disadvantages of a Star Topology
  • Requires more cable length than a linear topology.
  • If the hub or concentrator fails, nodes attached are disabled.
  • More expensive than linear bus topologies because of the cost of the concentrators.

Related Questions

Bus topology as many nodes are connected to single link

Network Topology refers to the way that cables and other pieces of hardware connect to one another. There are four common "base" types of topologies: bus, ring, star, and mesh. There are other types as well, but these are referred to as "hybrid topologies." The most commonly used network topology is a hybrid topology called the Star Bus Topology.

whatarethetypeoftopology Network topology is a layout which shows that how a connectivity communicates and the flow takes place in a network. types of topology are 1. BUS topology,2. Star topology,3. ring topology.

There are for basic network topologies: Star (arcnet) topology Bus(ethernet) topology Ring network topology Mesh network topology

Ring Topology, Mesh Topology, Bus Topology, Star Topology

Network topology can be defined as the way in which different computers are interconnected with the help of some specific media.ORThe physical layout of the computer is known as network topology.there are four types of network topology.1. Star topology2. Bus topology3. Ring topology4. Mesh topology

1.bus topology, 2.ring topology, 3.mesh topology, topology, 5.hybrid topology

Regional Network ---- There are four basic types of network topologies: bus, ring, star, and mesh.There are also many other types as well, but they are hybrid topologies, meaning they are a combination of two or more of the four basic topologies. Two examples of hybrid topologies are the star bus topology and the star ring topology.

Network topology is the study of the arrangement or mapping of the elements (links, nodes, etc.) of a network, especially the physical (real) topology. There are three basic types of topologies: bus, star and ring.

Advantages include: Its easy to set up, handle, and implement, It is best-suited for small networks and its less costly. There 3 types of topology which are; ring, bus and star topology.

a topology is a way to connect the network system. we can connect network with different types ring ,bus and mash is a topology or way to show connect network with different types in ring topology the systems which we want to connect in network in the form of ring

TOPOLOGY :- It is the physical layout of the workstations, severs, gatewaays, hubs and cabling. the physical configuration of network, including the types of cable and connectivity devices used. There are 6 types of topologies and are as follows. 1}Ring Topology, 2}Bus Topology, 3}Star Topology, 5}Mesh Topology, 6}Tree Topology.

There are four types of network topologies. These topologies are Star, Mesh, Ring , Bus. Most commonly used topology is star topology.

Mesh network in which multiple redundant links exist between multiple nodes (computers/hosts/servers/distribution switches, etc) so that the network has a web-like topology. This type of topology has the most redundant and fail-over resilience of any topology. It allows the majority of the network to be up and running even if there are multiple cable cuts or equipment failures. Due to it's increased costs there are two types or versions of this topology: Full Mesh and Partial Mesh. The Full Mesh simply means that each node in the networks connects to EVERY other node on the network. This GREATLY increases the cost and complexity of the network with each additional node. The Partial Mesh means that each node is connected to at least two other nodes (could be more, the more you add the more cost/complexity however the more resilient the network is). This give partial cost/complexity but partial resilience. Contrast with bus network, ring network, and star network.

Network topologies is the means in which a network is structured. There are two types being physical and logical. Logical topology shows how data is delivered between a network.

tpology are mainly three types (1) STAR TOPOLOGY,(2)BUS TOPOLOGY,(3)RING TOPOLOGY

A star topology is a type of mathematical topology. Mathematical topology is essentially geometry without concern for distance. It asks questions such as for a given shape, (in the abstract sense) "what connects to what," "is it possible to reach point x from point y without passing through point z," and "are these two points connected at all?" A star topology is a type of topology where all the points (for example, computers in a computer network) are connected to a central point, but not directly to each other. Go to the following address to see several types of network topologies, including a star topology.

The bus topology is one of the four main topology types for networking. It allows systems to be connected in a straight line without any other network connectivity devices. As a result, it is easy to construct and needs very little in the way of configuration, and is inexpensive compared to other topologies. The main result of any topology is to connect clients together in order to share resources.

To beter understand the area computer networks, one should understand the basic broad categories of computer networks and data communication. For example one should be able to define each of the following terms. The two basic categories of network topologies are: . Physical Topology .Logical Tpology The Basic Topology of Network. 1) Point to Point 2) Bus 3) Star 4) Ring or Circular 5) Mesh 6) Tree 7) Hybrid 8) Daisy . Advantages of Network . Disadvantages of Network . Introduction of Network Types

There are two basic categories of network topologies Physical topologies Logical topologies The shape of the cabling layout used to link devices is called the physical topology of the network. Logical topology is the way the signals act in the network In BUS topology you have "THE LINEAR BUS" and "THE DISTRIBUTED BUS" IN the LINEAR bus all the nodes of the network are connected to a common transmission medium which has 2 end points where as in the DISTRIBUTED, all the nodes are connected to a common transmission medium which has more than 2 end points.

a physical topology specifies what

Topology refers to the physical wiring of a network. There are 4 basic types of topologies:busstarringmesh and/or hybrids

Different types of Networking topologies are 1] Bus topolgy 2] Ring topology 3] Mesh topology 4] Hibrid topology

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.