Manual Transmittion -
Flywheel to Crank - 105 Foot Pounds
Pressure Plate to Flywheel - 33 Foot Pounds
Automatic Transmittion -
Flex Plate to Crank - 65 Foot Pounds
Pressure plate to flywheel bolts - 24 ft/lbs
Pressure plate to flywheel torque is (ft lbs) 14 to 20.
Pressure plate to flywheel torque is (ft lbs) 14 to 20.
What are the torque specs for a flywheel and pressure plate on a Datsun 240Z
80Lbs for flywheel, 10 to 15lbs for pressure plate
pressure plate to flywheel bolts - 15 to 24
Flywheel 79.7ft lbs - 85.5 ft lbs pressure plate 18.5 - 24.4 ft lbs
remove transmission, remove torque converter (auto), or clutch and pressure plate (manual) remove flywheel flywheel and pressure plate must be Torqued to factory specs
For your 1992 Nissan/Datsun 300ZX: Flywheel Torque 61-69 Foot pounds (Final torque)
depends on the engine size the 4.6 flywheel to crank is 62lbs and pressure plate to flywheel is 18lbs
90 ft lbs is the standard torque on most flywheels
It can Only go on one way. The side where the springs stick out further go toward the pressure plate because they will hit the flywheel befor you can bolt on the pressure plate