0
What are the causes of brakes locking up on 91 Chevy 4x4 half ton?
Wiki User
∙ 15y ago
Axel seals leaking grease on the brake shoes.
Wheel cylinders leaking brake fluid.
To much brake dust in the drums.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you assembly the back brakes in a 1983 Chevy one half ton pick up?
Plesae cancel this reqeust
How do you take the rear rotor off a 85 Chevy half ton 4 wheel drive?
I don't remember 1985 Chevy 1/2 ton pickupshaving rear disc brakes. It should be a drum brake in the rear and disc brakes in front.
How do you remove the shifter knob on a 95 Chevy half ton standard transmission?
under the knob, there should be a locking nut on the shift rod. Loosen this and the knob should just unscrew
Are the rear brakes on a 1991 Chevy 4x4 half ton pickup self adjusting?
Yes, but never trust them to work. Every six thousand miles the drums should be pulled off and brakes cleaned and adjusted. That is when the tires are off for a rotate anyhow.
What causes 2004 Chevy half ton four wheel drive pickup Auto Transmission to slip in drive and not reverse?
a blown transmission
Can you explain how a 1970 dual circuit master cylinder functions?
One half feeds the front brakes and the other half feeds the rear brakes. If one half fails the other half helps you stop but not as efficiently.
Is there a 60-70's Chevy vehicle with disc brakes which will fit on a 66 Biscayne's spindle joints?
I don't know exactly, but check a mid seventy's half ton van. ya may get lucky
How many brakes do you get if you work nine and one half hours in Oklahoma?
It is unlikely that you will get any brakes unless you work in the automotive sector.
You have an 82 Chevy half ton 4X4 with a grinding noise in the front axle only with both hubs locked and hard braking but with either hub unlocked there is no sound what could it be?
check the manual locking hubs or the u joints and had the same problem and it was the hubs
How do you replace the ignition switch assembly on a 1990 Chevy half ton truck?
If this has the locking tilt wheel it is better to find a salvage yard and get the entire steering assembly . Can get for around $100. Parts and time for replacing the Ignition assembly if you can do it at all will not be worth the effort.
How do Ford locking hubs work?
The Ford locking hubs allow you to manually disconnect the front wheels of your vehicle from the front half shafts. This basically shuts the 4 wheel drive off.
What does 1500 Chevy mean?
Half ton.
