Are you installing this from scratch because it should just be a plug and play. For a JVC stereo: # Right Rear(+) & Right Rear(-) = Purple # Right Front(+) & Right Front(-) = Grey # Left Rear(+) & Left Rear(-) = Green # Left Front(+) & Left Front(-) = White # Antenna = Blue # Battery/Constant = Yellow # Chassis/Ground = Black # Illumination = Orange # Ignition = Red This is the setup I have on my 1995 106xs
Wiring directions for installing a JVC CD player model number kd-lh1000 into a 1995 Plymouth Grand Voyager are illustrated in the manufacturer-supplied manual.
The wire!! The breaker is there to protect the wiring not the device plugged into the circuit.
If an immobilizer light on a 2005 Peugeot Boxer will not go out it indicates a problem with the wiring. The immobilizer can be by-passed until the wiring can be checked.
heating does not work
Try www.crutchfield.com, they are the best for aftermarket stereos, parts, instatlation, etc.
nightmare, you have to use a peugeot kit that gives an extra control unit, that then has to be programmed to the vehicles BSI.
Peugeot 106 workshop manual.
Green and red wire on lambdA sensor
Short or incorrect size fuse. Make sure you are installing the correct fuse. If so, look for a short in the wiring.
Could be switch on gearbox, wiring or bulb.
If you clock does not work in your Peugeot 206 when the stereo is plugged in, check the clock fuse. You should also ensure you do not have a wiring problem.
yes you need to buy a haynes manual
Ask a doctor
No there isn't but most do have the wiring. You can buy one from a scrap yard and fit it urself or just take it to the nearest peugeot garage.
get the after market wiring harness
You can look here for the wiring. The pomp is item 1210. http://peugeot.mainspot.net/wiring106/tu1mz.shtml Greetings Schaap.
Work quickly. More safety. The correct wiring.
No, there not a way to fix the car CD player. Without the proper wiring harness, all of the electrical components in the radio are damaged. When installing the next unit, ensure that you have the proper wiring harness.
From the company that made the remote start.
peugeot.mainspot.net i couldn't find the diagram..1.4xsi's are tu3 engines :/
the negative wiring for the speakers is the same colour as the positive but with a black line going down it
Overheating of electrical wiring is overcome by installing the correct size conductors to carry the load amperage of the equipment. Use a larger size wire to the load. The main purpose of the breaker is to protect the wire that is connected to it. If the wire becomes overloaded due to a high current flow the breaker will trip.
Wiring diagram for instalation