Q: What are the cylinder head and cam journal torque specs and sequence for a 1990 Acura Integra?

Write your answer...

What is the Cylinder Torque sequence 2000 Pontiac Montana 3.4V6

what is the head torque sequence for a 1991 pathfinder

the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.

The torque specs for a 1995 Acura Integra GS-R cylinder head and cam gears is 128 lb. ft at 6,200 rpm. It also has 170 hp at 7,600 rpm.

in sequence torque bolts to 20nm, then again in sequence turn a futher 120 degrees, and again in sequence 120 degrees.

The cylinder head torque settings are a list of parts in the torque sequence. It tells where everything is and can be found.

21ft lbs

headboltstork

100ft lbs

65 flbs

petrol/deisel 2.4 or 3.0??

85 N·m (8.5 kg-m, 61lb-ft)

Look for the answer online at autozone ,under repair info.

For the 1996 Saturn SL1 1.9 liter 4-cylinder, the torque in sequence one is 22 ft/lbs. In step two, torque in sequence to 37 ft/lbs. In step three, turn all the bolts 90 degrees and double check the final torque in the sequence.

hondahookup.com has manuals

What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?

Tighten the cylinder head bolts in three steps using the sequence provided : ==== ==== # Step 1- Snug tighten M12 cylinder head bolts, in sequence, to 34 NÃ‚Â·m (25 ft. lbs.) and M8 bolts to 20 NÃ‚Â·m (15 ft. lbs.) torque. # Step 2- Tighten M12 cylinder head bolts, in sequence, to 54 NÃ‚Â·m (40 ft. lbs.) and verify M8 bolts to 20 NÃ‚Â·m (15 ft. lbs.) torque. # Step 3- Turn M12 cylinder head bolts, in sequence, 90 degrees and tighten M8 bolts to 34 NÃ‚Â·m (25 ft. lbs.) torque.

torque head bolts and order ford 1997 2.0L picture if avalible please

Herad torque is 100-110 Newton metres sequence is 7 3 1 5 9 8 4 2 6 10 hope this hgelps Mike 2

Torque Sequence ------------------------ Front | 5 3 2 8 | Of | 7 1 4 6 | Engine ------------------------- Step 1 - Torque to 44 ft/lbs Steps 2 - Turn 95 degrees Recheck final torque in sequence

The Jeep Cherokee 4.0 liter engine cylinder had torque specifications are 120 pounds per square inch. The cylinder head bolts should be torqued at 40 pound intervals.

valve seal possition

90 degree is nm

80 nm

hondahookup.com has manuals u can download with the info u need