I found this helpful: http://hondaswap.com/reference-materials/88-ecu-error-codes-29109/
Good luck.
The primary cause for the drive light to flash on a Honda Accord is a malfunction in the transmission. Error codes from the vehicle's computer can be read using an OBDII reader.
hello :) can you please inform on a error code p730 for a 2000 honda accord v6 vtec engine thank you
Depends on what the error code is.
Trouble code P0118 means: Engine Coolant Temperature Circuit High Input
When a check engine light appears on a 1991 Honda Accord the ECU is letting the driver know the engine is sending an error signal. Sourcing out the problem through a diagnostics test will help narrow what could be something as simple as a blown fuse to something as terrible as a blown engine.
It means there was an error inputting the codes to unlock the radio. If the radio locks just leave it on and in about 1 hour of use it will unlock and allow you to try again.
diconnect the battery then connect it
TCM A/T controller circuit - this is what my OBD scanner says
two ways to read engine codes. 1. follow the routine detailed in your wksp manual id you have one OR 2. take it to a Honda agent who will have the necessary equipment eg code reader to do the jod, they will also be able to effect a repair at the same time and wipe the error code from the display.
Your engine light is flashing on the VP commodore because of the error codes.
Leave the radio on for 1 hour and it will reset and then accept the 5 digit security code.
The error codes indicate a failure has been detected. If you ask a question with the specific code number, with year, model, and engine we will try to answer.