what is a fuse fusible link for 1983 Honda accord
which spec are you looking for?
2.9kg-m/8000rpm or 20.97ft/lbs these specs come from an 84 atc250r which I believe is the same air cooled 247cc two stroke as the 83.
head torque is 55lbs for turbo
90 ft lbs is the standard torque on most flywheels
1983 honda accord 4cyl
check the fluid with the car off
It should be Inside the gas tank
Click the link I posted for a diagram.
The 1983 Ford F 100 manifold bolt torque specifications are 45 pounds. The manifold bolts should be torqued in 15 pound intervals.
HP was 82 or 83 on my 1983 Magna, Do not remember the torque but it is a very fast bike for a 750
Ford E350 or E450 wheel bolt torque is 150 ft/lbs
You know it's bad when you apply 12v power to it but it doesn't run.
10w30 Weight any premium brand. I use Pennzoil and highly recommend it.
18-23ftlbs on the 12mm bolts...6-9 ftlbs on the allen screws
You can find that in the haynes manual at auto zone.Its kinda hard to find but have patience you will find it.
25nm on all 4 bolts 1, 2 , 3 , 4 then 90 degrees and 90 degrees
It is listed in the owners manual and under the hood on a placard. Any auto parts store can also provide this info.
No, a 1983 Honda Xl250 does not need a battery to start.
Since you didn't mention the exact model, I've researched all four Honda Motorcycle models in 1983, with 1100cc engines. These include the 1983 Honda CB1100F Super Sport 1100 (valued at $3,515 retail), the 1983 Honda GL1100A Gold Wing Aspencade(valued at $3,030 retail), the 1983 Honda GL1100I Gold Wing Interstate (valued at $2,550 retail), and the 1983 Honda GL1100 Gold Wing (valued at $2,420 retail).
How do I check the transmission fluid on a 1983 Honda Civic 1500DX
1983 Honda civic value
I have been working on the same engine in a 1983 F150! I have found most of my information through Auto Zone.... Here is the link................. http://www.autozone.com/az/cds/en_us/0900823d/80/0a/52/77/0900823d800a5277/repairInfoPages.htm
Hero Honda Split was created in 1983.