HEAD BOLT TORQUE For your 1999 Pontiac GRAND AM: HEAD BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE SEQUENCE --------- | 6 2 3 7 | | 5 1 4 8 | --------- STEP 1: TORQUE IN SEQUENCE TO 33 FT/LBS STEP 2: TURN AN ADDITIONAL 90 DEGREES RECHECK FINAL TORQUE IN SEQUENCE *** CAUTION *** ENGINE USES TORQUE TO YIELD HEAD BOLTS (TTY) THAT PERMANENTLY STRETCH DURING THE INITIAL INSTALLATION. NEW HEAD BOLTS MUST BE USED WHEN CYLINDER HEAD IS REPLACED OR RE-INSTALLED TO OBTAIN PROPER TORQUE. ALWAYS COAT BOLT THREADS WITH THE PROPER SEALANT.
need torque specs for 3.4 pontiac grand am intake and rocker arms
what are the torque specs for lifters on a 2000 Pontiac grand am gt
2003 pontiac grand prix 3.1
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
18 ft pounds
The torque of the 1998 Pontiac Grand Prix is 220 ft.-lbs. at 4000 rpm. This remained the standard for all sixth generation models of this car.
The intake manifold torque specs for the 3.1 L on a 2001 Pontiac Grand Prix is 195 ft lb. and 264 Nm at 4,000 rpm. It also has 175 hp at 5,200 rpm.
The short bolt torque specs for the head gasket of a 2000 Pontiac Sunfire is 43 foot pounds. The torque specs for long bolts is 46 foot pounds.
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
first get new head bolts. they are torque to yield. torque them to 37 ft-lbs and then rotate an additional 120 degrees.
The head bolt torque specifications, for your 2002 Pontiac Grand Prix, is 160 pounds per square inch. The head bolts should be torqued in 40 pound intervals.
For the upper intake manifold bolt on a 1999 Pontiac Grand Am, apply 25 NÂ·m 18 lb. ft toque. It is best to have a reputable repair manual on hand to double check your specs.
For the 1996 Pontiac Grand Am 3.1 liter 6-cylinder, the torque for the intake bolt is 10 ft/lbs. The torque for the rod bearing cap in step one is 15 ft/lbs, and in step two turn an additional 75 degrees.
If you pick up a Haynes or Chilton manual for your car, it will contain all the torque specs you need. FriPilot
195 lb·ft of torque (205lb·ft of torque for GT)
Pick up a Haynes or Chilton manual for the car. It will have those torque specs as well as many others.
lower intake is 115 in pounds upper is 18 ft pounds
Not really sure if you are asking about the oil pan torque, it's 12lbs. see link for other torque specs.
If you mean engine performance, then it has 240 hp and 280 lbs of torque
Torque to 95 foot pounds with thread locking compound.
37 ft. lbs to 120 degress