What are the rod tork specs on a 96 Chevy 350?

What is the crank tork and rod tork on a 1996 Geo Tracker 1.6 Engine Block number G16A What foot pounds do they tork to??

I'm answering my own question for anyone who needs the info. My brother tells me that the Chevy 350 cu. in. engine is the same over several model years. This would make the torque specs the same for the 1979 350. 45 ft-lbs. for the connecting rod bolts and 65 for the cylinder head bolts. Convert to Nm (Newton-meters) on Google if necessary.

The rod torque on a Chevy 350 V8 depends on which size rod bolt you have. On the 3/8 rod bolt the torque is 45 ft/lbs On the 11/32 rod bolt the torque is 35 ft/lbs

what are the torque specs for main and rod bearing in 2.2litre s-10

.002" is what I have on a fresh rebuild.

Chevy did not make a 350 in 2001. The last 350 was built in 1999.

Depends on the rod bolts, but usually 45-50 ft./lbs.

It depends on the brand of the rod bolts, but usually 45-50 ft/lbs.

Need to know the year. All 350 cid. engines are different can not answer correctly sorry.

Need more info, Like the year and what it is in.

Yes, the rod caps must be installed on the same rod and in the same orientation.

Just bought new rods with 2.10" journals

The torque specs for a 235 Chevy include main cap bolts of 100 - 110. Its bellhousing bolts are 45 - 55, flywheel bolts of 50 - 65, and rod nuts of 35 - 45.

not 100% sure but i think its 65lbs

45 Lb/ft Below is a link to all small block Chevy torque specs.

65 ft-lbs on cylinder heads and 45 ft-lbs on connecting rods

It is probably a broken valve spring.

Cam bearings, Rod and Main bearings. That will be all of the bearings required to replace when rebuilding a 350 engine.

The notches for the bearings to lock from spinning are both on the same side.

Most all 350 rods torque at 45 FT. LBS. I would like to know the year.

Kinda depends on what you want to use it for. A high-winding motor (like in a dragster) would like a little more bore with a little less stroke. A stump-puller would prefer more stroke.

The Caterpillar C15 diesel engine torque specifications for the rod bearings is 35 pounds. The main bearing torque specifications is 350 pounds.

The rod bearing torque spec from mercruiser is 45 lb there is no spec that i can find for the main bearing caps.

Sounds like a rod bearing. Time for a rebuild job.

18 foot pounds + an additional 180 degree turn.