0
if you here weird noises like eek eek or thump thump
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Why wont starter engage all the time when i turn on the key on a 96 pa?
Could possibly a solenoid on the starter going bad. Could possibly a solenoid on the starter going bad. Could possibly a solenoid on the starter going bad.
Your car will not turn overthe battery is strong and the alternator is working could the starter just need to be tapped or should you replace it It has never given any signs of going out?
Chances are the starter solenoid has developed a bad spot. If you are handy you could try to replace just the solenoid otherwise it may be time for the starter/solenoid combo.I assume you have checked your battery cables.
Will shifting solenoid make noise when its going out 2001 pt cruiser?
When a shift solenoid goes bad the solenoid doesn't make any noise.
Can a solenoid suspended by a string be used as a compass?
A solenoid can be used as a compass when a DC current is going through it because when a current is going through the solenoid, the magnetic field lines are nearly uniform and perfectly parallel inside of it, giving it essentially a north pole and south pole.
What is the sign of a solenoid going out?
theres a clicking noise then nothing happends
How do you check the fuel solenoid on Briggs 18 hp ohv engine?
Switch the ignition to on. Put your meter to 12VDc. Touch the hot wire going to the solenoid with the meter positive probe . Touch the meter negative probe to ground. If you have 12VDc and you don't hear a click when you turn on the switch, the solenoid is probably bad. If you don't have 12VDc, check fuses and the wire going to the solenoid.
Where is the shift solenoid to shift from park?
its going to be some were on the tranny a small metal rode is going to be connected to the park/shift solenoid and that metal rode runs throw and connects to your shift handle inside the car/truck
How do you tell if glow plug relay in 2003 is bad?
It is important to know the signs of a bad car part.The signs that a glow plug relay would be fast clicking from the solenoid, or no clicking at all.?æ
How do you test the solenoid on your lawn tractor?
take your multimeter and set it to volts, going into the solenoid you should have anywhere from 12.2 to 14v and coming out it should not drop anymore than 1 volt. If it does the solenoid has to much resistance and should be replaced
Why does your starter keep going after van is started?
Solenoid the starter is stuck would be my suspicion.
Why 2001 Chrysler sebring dies at stop stop signs?
Could be the "Torque Converter Lock-up" Solenoid sticking in the lock position.
What are the signs a transmission is going out on a Nissan 240SX?
=
