on a1990 Isuzu 2.6 and 2.3 I thing you mean the main bearing caps for the crankshaft
72.3 (+ or -) 7.2 lb-ft
Torque settings for yamaha banshee
what are the torque for camshaft and cylinder head bolts please
hi i am looking for the torque settings for a proton gen 2 cylinder head bolt and crank shaft bolts both big ends and main bearing bolts
The "crank" sensor is the pickup plate under the distributor cap.The "crank" sensor is the pickup plate under the distributor cap.
Tik settings for crank
which direction does a crank shaft pully bolt screw out on a 2002 honda accord lx 2.3l eng. clockwise or counterclockwise?
The Torque specs for a 1992 Jeep Crank with bearing caps is 80 ft./bls. You will need to check your chiltons.
Isuzu part number 8-97258-523-0(MSRP $193.86) crank sensor is on the right side(passenger) of the engine block, just behind the mount.
cam is set at 12 oclock ip pump is set at 3oclock crank is 6 oclock a aux is 9 oclock
55 flywheel to crank 70 flexplate to crank
What position is the crank sensor on a f250 ford pickup
No crank sensor, just the pick up plate in the distributor.
It's attached to the flywheel that is attached to the crank.
It has both.It has both.
No crank sensor on a 1990, only the pickup plate (cam sensor) in the distributor. how about a 1991?
It is inside the distributor and is more commonly known as a distributor pickup, HEI pickup, pickup coil, hall switch, or hall effect sensor. I hope that helps.
70 ft lbs
Salvage yard or Toyota dealer.
Do you have a 4.3L with a distributor? If so, the crank sensor is in the distributor and may also be called an HEI pickup or Hall switch.
crank tool is in clips along the top of the frame in front of the radiator,under the hood
Refer to your manual. Buy a Chiltons.
60 ( ft. lbs )