Will fit Legacy/Outback Model Year 1995 to 1999.
how to replace high/low beam, turn signal lever on 1996 subaru outback wagon
There is no such thing as a 1995 subaru outback, the outback package was not offered on a subaru legacy until 1996, you either have a 1996 subaru outback, or you have a 1995 subaru Legacy L or LSI wagon. Both will be covered in most guide books you can pick up at your local autoparts store.
A 1996 Subaru Legacy Outback requires: For automatictransmission: DEXRON III For manual transmission: GL5 75W90 gear oil
the torque for the cam shaft are 9lbs/foot
Should fit second generation Legacy/Outback model year 1995 to 1999.....
What are the torque specs for a 1996 Chevy cavalier 2.2l
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
Check out http://www.fueleconomy.gov/feg/sbs.htm
Directly below the alternator on the block.
Take them out then put the new ones in
What are the torque specificatons for a 1996 v6 3.1 head on an oldsmobile achieva
Probably 1996 thru 1999 if it is going wagon to wagon.
Mounted inside the fuel tank on the top.
20 ft. lbs.
325 ft. lbs
What specs do you need? Torque for the gears or caps? Dimensions? TDC timing marks?
If you have a 2.5 liter engine it is located where the lower radiator hose meets the engine.
See your user manual, its great for help with all the basic maintenance