49.5 is too low for either motor.
and there are 2 motors and the procedure varies by motor.
there is a TSB effecting this spec.
go to above page , click on sequence link.
note carefully there is a loosening seq. for 16v motors.
aluminum heads need TLC.
please dont guess.
torq spec is 49.5 foot pounds
Head Bolt Torque Specs for1995 Suzuki Savage Ls650ps
The torque specs for a 1985 Suzuki Quadrunner can be found in its service manual. The service manual can be obtained from Suzuki upon request.
http://www.kick-fix.com/specs/torque1.html one url, mine. free.
Torque specs for a 1995 subaru impreza 2.2 head bolts?
what torque specs on cam shaft bolts 2000 saturn 2.2
The torque specs for 660 raptor head and hex bolts is about 26 lbs.
Torque specs for main bearing
Torque specs for brake caliper bolts 2005 mazda 6
Torque specs can be found in the Haynes Auto Manual.
wich bolts do you need the specs on
8-9.5 in./lb torque
18 ft lbs in sequence then 90degree in sequence then 90degree in sequence then 90degrees in sequence
what is the torque for the bolts on the clutch springs for a trx 90/>
torque specs axel not and wheel hub bolts
Torque for 292 head bolts is 95 ft lbs
The torque specs for a Toyota Camry cylinder head is 60 pounds for the inside bolts and 50 pounds for the site bolts. The cylinder head bolts should be tight from and to end alternating.
torque specs 2000 mercury sable 3.0 12V rod bolts
what are the torque specs on body mount bolts
1991 toyota camry head bolts torque specs
What is the torque specs for Head bolts for 2003 Johnson 4 stroke 140 hp outboard boat engine
For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.
32ftlbs for the pin bolts
Pressure plate to flywheel torque is (ft lbs) 14 to 20.