Mazdatruckin.com has a tech page with accurate torque values listed referenced directly from the Mazda Factory Manual. The Haynes manual is known to have wrong torque values on many parts which has led to many engine failures. I've added the link below.
The torque specs for the cylinder head on a b2200 are 59-64 ft lbs (cold).
stock horsepower and torque was 85 HP and 115 LBS of torque
where is the fuel pump on a 89 Mazda b2200
where is the EGR valve on a 1989 mazda b2200
Who is a valve calibration for mazda b2200 1988
The 1992 Mazda B2200 will hold close to 17 gallons of gas. The 1992 Mazda B2200 is a four-cylinder vehicle.
The attached links should answer you're question. Kyrasis6 Mazdatruckin.com
92 b2200 ,fuel injection psi should be 38 to 46 psi
where is the ignition module located on a 1988 Mazda b2200
A Mazda B2200 engine with carburetor has 85 horsepower, and with fuel-injection has 105 horsepower.
How do you replace fuel pump 92 Mazda pick up B2200?
not much man in that area only the B2200 for improved HP and torque very good improvement if you ask me yeehaw
The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com
i have a 1993 Mazda b2200 and the fuses are left of the steering colomn. the cover pulls down and the radio fuse is on the top to the far left.
A 1995 KIA Sportage 2.0L 16v DOHC will bolt right into the B2000 and the B2200. You will have to get a system called megasquirt from www.diyautotune.com Your Horse Power will be almost double that of the B2200 2.2L SOHC
Cylinder head bolts torque is 59-64 ft lbs (cold).I suggest rechecking the torque after about 500 miles or later.And always recheck with engine cold(meaning not run for the day).
Find out why it's running rich, fuel pressure regulator, air filter, etc....
If it is like the b2600i and b2200 it should be right behind the driver kick panel.
Answer.031 is the spark plug gap for the b2200. I do know this for fact I bought my 1987 b2200 new,I def know this to be correct after 22yrs of ownership.