answersLogoWhite

0


Best Answer

I ran into this with a '97 Yukon (same vehicle) and after months of running into this problem intermittently, it turned out to be a small harness in the distributor housing that had corroded ... discovered this after already replacing the obvious ... cap / rotor / coil / and ignition module.

User Avatar

Wiki User

โˆ™ 2006-11-21 19:19:06
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: What can be the problem on a1996 Chevy Tahoe 5.7L vortec engine it turns over but won't start you checked and its receiving fuel all fuses are ok?
Write your answer...
Submit
Related questions

The difference between a 4.3 V6 engine and the 4.3 V6 vortec engine?

The vortec has bigger pistons


How can you tell if you have a vortec engine?

Look at the intake manifold. A vortec engine has 8ea. All the others have 12ea.


What size is the engine on a Silverado 1500?

The 2001 model of the Light-Duty Silverado 1500, had an option of four engine sizes; a 6.0L Vortec V8 engine, a 4.3L Vortec V6, a 4.8L Vortec V8 or a 5.3L Vortec V8. The Heavy-Duty 1500HD comes with three engine options, these are 6.0L Vortec V8, 8.1L Vortec V8 and a 6.6L Duramax V8


Does ford have a vortec engine?

" vortec " is a title that GM uses on some of their engines


How do you disasemble 4.3 vortec carburetor?

The 4.3 Vortec engine never had a carburetor.


How can you tell weather a 1997 5.7 vortec truck engine is a lt1 or ls1?

A vortec 5.7 is a lt1 based engine.


Will the starter for a 4.3L Vortec V6 fit on a 305 ci engine?

will a 4.3l vortec starter fit a 305 vortec?


Is the engine control moduel the same on a vortec 4.3 and a vortec 5.7?

No it is not even close.


Can a 4.3 vortec air conditioner compressor fit on a 5.7 vortec engine?

Yes as long they were mounted on the same side of the engine.


Where can you get an engine diagram for a 5.3 vortec engine?

torque diagram


Is a GM Vortec 2.2 engine an interference engine?

Yeees?


Will intake from 87 tbi fit vortec?

No because the ports on a tbi head are different than the ports on a vortec head, vortec heads need a vortec intake however you can switch a carburated engine to a tbi engine because the heads are the same


Why is a 2000 silverado 5.3 Vortec hard to start and the passenger side of the engine misses when it is started?

A 2000 Silverado 5.3 Vortec that is hard to start and misses on one side of the engine might have a problem with the coil pack or the spark plugs. It could also mean that the block is cracked if the engine is prone to overheating.


How many quarts of oil does a 2000 Chevy 4.8 liter vortec engine take?

A 2000 Chevy 4.8 liter vortec engine usually takes 6 quarts. It truly depends on the vortec engine, usually the standard is between 5-6 quarts to fill the engine.


What year is your vortec 4.3L engine?

2000


What year is your 4.3 vortec engine?

1999


How much torque for a 97 Chevy Z71 350 vortec engine?

how much torque for a Chevy Z71 350 vortec engine valve cover


What is the firing order on Chevrolet vortec engine block?

We need to know size engine you have.


Is the motor in the 1991 shortbed silverado 1500 truck a vortec?

NO. That would be the TBI / throttle body injection engine Not a vortec. The vortec will not work in the 91.


Are the heads on a 1992 Chevy 350 vortec or not?

No, the 1992 Chevy 350 (5.7L) V8 is not a Vortec engine.


Will the intake manifold off vortec 5.7 fit a 305?

It will as long as the 305 is a VORTEC ENGINE TOO.


Where is the oil sending unit located on the 2001 Chevy 4.3 vortec engine?

Where is the oil sending unit located on the 2001 Chevy 43. vortec engine?


Will a vortec engine install easily in a 1980 Chevy scottsdale?

You will need an after market Vortec Intake None FI 4BRL set up. The vortec engine has longer runners to increase air speed for the vorteciy action of the heads.


What is the engine in a 1998 Chevy Suburban 2500?

5.7L 350 Vortec engine.


Will a 1999 vortec intake bolt to a 1996 throttle body injected 350 block?

NO it will not. You would need the heads off the vortec engine to make it all work. The 96 that you are talking about should be a VORTEC engine already from the factory. But you may have an early 96 and that is why it is a TBI engine. That was the year they switch to a vortec. 96 TBI no such animal,TBI OBD2 no