how do you remove the ignition switch on a 1990 chevy half ton pick-up?
You will be fortunate to get 15 mpg.
what is the body being changed too?
largely depends on axle ratio
4 degrees BTDC.
how much can a cheve s10 1992 pull ?
window sticker for a basic chevy half ton pickup in 1975
a blown transmission
A C10 is a half ton pickup so, 1000 lbs would be what that vehicle can safely haul.
No, only gasoline engines in 1993; 4.3 liter, 5.0, 5.7, and 7.4 (454).
Every Chevy half ton ive seen 88 to 2010 has the 6 lug
Bulbs. All the bulbs are fed from the same fuse.
There is a new part out to correct this try this number at dealer or go on eBay for best price. pt. no. 19153614
When new they got about 20MPG I (this info is from an 84 suburban half ton 2WD, a 93 half ton 2WD ,83 blazer and an 84 half ton pickup 2WD.
YES. It will not harm the engine are running condition.
depends, if it has over over a 100000 miles youd probly get around $2800-$3500 depending on what shape its in
go online to lmc truck.com to find Chevy truck parts or grumpys.com
The proper spark plug gap for a 1980 Chevy 350 Pickup is .045, according to spark plug manufacturer (Autolite, Bosch, NGK) specs.
The oxygen sensor on a 1994 Chevy truck is on the drivers in the exhaust pipe right next to the manifold pointed twards the cab or the transmission.
A half ton.
I would recommend you replace the entire hinge and forget about repairing it. In my experience this is the best route to take.
The C/V joints make noise in the axels when the steering is turned fully one direction and accelerated If they are noisy, they need replaced.
If you have the "know how" you can.........to answer your question, yes, it can be done
a C1500 is a half-ton pickup, a C20 was a 3/4 ton. Chevrolet half ton trucks used to be called C10s.