answersLogoWhite

0

there is a bad ground somewhere

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

A right-turn signal causes the emergency lights to flash when the headlights are turned on. What is the cause of this problem?

A mis-wiring or short circuit somewhere between the controls, fusebox and lights.


Why do the Dashboard Lights on a 1996 Camry flash for 45 seconds after car is turned on and turned off happened without warning or changes to the car?

because they do.


1991 XJ6 rear lights flash after car is turned off and key is removed?

do you have an aftermarket security system installed in it?


What causes a xbox 360 to flash 3 lights?

a malfunction of the hard drive to send signals to the processor


How do you fix a 1990 Mitsubishi Lancer indicators when they flash quickly but all the lights work?

it means that one of the indicator blubs have blu which causes them to flash quickly


Why do both rear tail lights flash when turn signal is activated on 02 Dodge Dakota?

Be sure the 4-way is turned off.


What is wrong with Buick Century 94 if left signal is turned on but does not flash?

More than likely the Flasher Relay is bad. If the bulbs are lit but will not flash it is definitely the Relay. This can also indicate a bad bulb on one of the lights on the side that does not flash.


What causes your 2005 crown Victoria turn signals to flash rapidly?

Usually this tells you that 1 or more lights are burnt out.


Why turning signals and hazard warning do not flash when turned on indicator lights do not flash but all turning bulbs are good 1984 Toyota corolla?

Answer You might want to check your flasher relay which is under the dash.


With it turned on, b?

With it turned on, but not connected to anything please press in and hold the reset button for one minute. You will see the lights on the front of it flash. Let me know when that has completed. Please do not connect anything yet.


Why does the light bulb flash when turned off?

When a light bulb is turned off, the filament inside is still hot and continues to emit light for a brief moment before cooling down completely. This causes the light bulb to flash before going completely dark.


Why do heater control lights flash on and off?

Why does my heater control lights flash on an off on my 1990 Z71