Check your brake fluid level in the brake master cylinder in your engine compartment when it is low your brake warning light will come on
cylinder stop drag
Check brake fluid level in master cylinder Check to make sure parking brake is fully released
Low brake fluid in master cylinder, fault in brake fluid level sensor, parking brake is on, parking brake sensor fault.
Not being torqued in the right sequence when the engine was serviced.
You could have an electrical problem that causes the warning to not trigger. If you are using a copied key, it may not register with the warning system.
Check brake fluid level in master cylinder Make sure parking brake is fully released warning light comes on because there is a fault in the brake system. you need to go to a mechanic before the brakes fail
The red " BRAKE " warning light in your dash comes on if the emergency brake / parking brake is on , or if the BRAKE FLUID LEVEL in the brake master cylinder ( located in your engine compartment , near the firewall , on the drivers side of the engine compartment ) IS LOW
There are various things that may cause a computer to occasionally chirp. In most cases, this will be as a result of the hard drive overheating.
What causes misfire 302, 304 and 306