Car Sounds
Toyota Tacoma
Chevy Trailblazer

What could a loud popping noise be in the front end of a 1993 Toyota 4-wheel drive when you turn sharp?


Top Answer
User Avatar
Wiki User
2007-03-18 03:33:55
2007-03-18 03:33:55

That loud popping noise is most likely a sign that your CV axles are worn out. If you turn to the right and you hear the noise most likely it is the right side. and visa versa for if you turn left.

User Avatar

Related Questions

No they make a 2 and 4 wheel drive.

It is basically a 4wheel drive Toyota Tacoma with only 2 wheel drive. All suspension components are identical to the 4WD version.

Only if you run it in 4wheel drive mode, then it will eat more gas.

If it has 4wheel drive, put it in neutral on the 4wheel drive shifter and put the regular shifter in 4th gear, if not I cant help you.AnswerIf it has 4wheel drive, put it in neutral on the 4wheel drive shifter and put the regular shifter in 4th gear, if not I cant help you.

you could have a leaky or damaged transfer case.

need diagram of 1992 4wheel drive front hub disasembly

the proper tire size should be printed on a label on the drivers side door jam i have a 1992 Toyota 4wheel drive and mine takes P225\75 -R15

The 2001 Rubicon is FULL time 4x4 from factory. Unless you installed a 2x4/4x4 select then it should always be in 4wheel drive.

97 through 07 Lexus lx470 08 lexus lx570 98 to 08 Toyota land cruisers 08 Toyota sequoias and 07 to 08 2 wheel or 4wheel drive tundras

yes, ford rangers do come with 4wheel drive

All true trucks are rear wheel drive or 4 wheel drive. Because of towing and payload needs trucks are rear wheel drive or 4wheel drive. If you have a heavy loadd in the back of the truck and it was front wheel drive you would not get any traction, the same as if you towing a load.

If it is a front wheel drive vehicle it could be a bad CV joint. In a rear wheel drive car it could be a bad universal joint.

No. In the winter it can be 2 wheel for the ice.

All that you do if put the shifter in the four wheel drive position.

Double clutch then go to 4th gear then go for it.

It could be the problem. The dealer can scan the code with a Tech II unit they have. The Trailblazer enthusiast forum!

2002 ranger wont go in 4wheel

what is the name for drive by wire in toyota

If they are the original ball joints they can't be lubed.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.