bad switch?
blown fuses
A blown fuse could. Look in your fuse box and replace any damage fuses.
The dash lights on an Explorer are used to light the warning symbols and to illuminate the speedometer, gas gauge, and RPM gauge. These lights are controlled by fuses.
Fuses blow when there is a short circuit or an over current condition.
I have no dash lights or gage lights that come on in my 1982 corvette, what could be the problem ? i checked all fuses.
did you check your fuses
Check ALL fuses. If you want to take the fuse for the lights out, just start pulling fuses until it goes out. There may be more than just those lights on that fuse.
Could be the bulbs or the fuses or the flashers or the signal switch assembly
It could be a blown fuse. Tail lights and brake/turn are on separate fuses. Apparently there is not a ground problem since brake/turn works OK.
Check the bulbs. If these are OK it could be the switch on the brake pedal arm.
First check your fuses if none are blown then check the switch.
bad combination light switch