if it is a front wheel drive check the cv joints
Sounds like your ball joints are shot. Could also be your axles. I had the same noise, clunking when i turned and it turned out to be my axles. Check the boots to see if they are ripped.
Check you E-Stop Brake on the rear.
Probably something is loose or worn... sorry to not be more specific, but you'll need to track it down to see WHAT is making that noise.
It could be making "noises" because it could be "crying" in some way for some reason. If you are giving it a hug or stroking it then it could be making noises because it likes you stroking it and making a fuss of it. Or it could be growling or barking at you/somebody else for some reason.
could be your crank shaft
Could be the front wishbone. Mine was making similar noise, especially over bumps. Not a major repair - approx €250 euro
AnswerA sport model should have DANA 30 front axles and DANA 35 rear axles A DANA 44 axle could be ordered optional on the rear.
If there is a clunking sound when turning a vehicle, the problem might be the ball joints in the front end. The ball joints help to support the A-Frame which helps to keep the wheel on and upright.
A cat could be making weird noises when the back is being scratched because it does not like it. Another reason could be because the cat does like it. The personality of the cat depends on the reason the cat is making the weird noise.
Yes, but there could be a toll charge associated with that route. Tolls are based upon the number of axles and total weight. A car towing a trailer would have 3 axles at the minimum, 4 if the trailer has dual axles.
If there is a clunking noise on a 1991 Firebird Formula 5.0 when going below 30 mph, and the clunking noise does not happen when the clutch is depressed, it is probably a problem with the flywheel. The flywheel moves freely when the clutch is depressed. When the clutch is not depressed, it could be that something is rubbing on the flywheel, like the clutch plate.
it could be anything, from the axles to an engine with a lack of oil.
The nature of metal is got expand when heated, So could be a reason to making the Noise.
The reason for this could be uncleansiness, try to wash your face, do not itch if it is continuous as it could damage skin making matters worse
It COULD be a constant velocity joint (CV joint) going bad.
it could be that your brake discs are completely warped. so you might just need brake repairs made on your vehicle.
Are you sure it is the transmission that is clunking? It could be the u-joints on the drive shaft that are making the noise. When the u-joints on the drive shaft are bad, there is an audble clunk when you accelerate and when slowing down (basically the same motions you go through when shifting gears).
because revelation God making to be known and with out that with reason alone how could we tell that God is real
it could need a greasing, but to be safe you should check it to see if any of the parts inside are broken.
There could be a couples of reasons a Toro lawn mower is making squeaking noises. One reason could be the blades need to cleaned. Another reason is the spindle that attaches the blades may need to be greased.
that could be around 18000 kilograms.
Yes, the wheel bearings or CV joint could be bad.
For some reason your body isn't making enough of the clotting factors that you need. Ask the doctor.
It could be the shift motor on the T Case. Or it could be the automatic shift button switch on the dash.
If someone hates you they must have a reason so ask him why he hates you and if he doesn't tell you then he will proberly get over it within a couple of days but if he tells you the reason then try making him feel better about what could of happened to create the hate.