My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?
Check the switch at the brake pedal, it is what makes the brakes come on, it may be malfunctioning.
The ABS and brake lights sole purpose is to signal you that you may have a problem with each / or one individual system. From your question we can assume that your ABS and brake lights come on continuously. There by we can safely deduce that you may have a problem with your ABS system and / or your brakes.
yes my brake lights dont work First check the fuses, then check the bulbs then check the brake light switch
Try checking the fuse for the brake lights. If all of your brake lights went out at the same time, this is most likely the problem.
there is a major problem in the brake system if both lights stay on. have it checked before you have no brakes at all
if you have your parking brake off and it is still on, then you have a problem with your brakes somewhere, you need to check the fluid, lines, pads and all the other stuff
It means there is brake problem somewhere, maybe the back brakes.
Brake and parking lights? Are you sure, the two aren't interconnected. Maybe it's just the brake light. If so, sounds like a bad brake light switch. If you step on the brakes and the brake and parking (sometimes called running lights) lights come on it sounds like you have a real problem. Suggest you have it checked right away.
Check the switch at the brake pedal .
Yes it can but that is rare. The more likely problem is one of the following:emergency brake is engaged slightlyBrake switch is faultybrake fluid is lowbrakes need servicing
You have a problem with the brakes, have a mechanic check it out soon before you have no brakes.
it may need some brake fluid
That means that the ABS computer has detected an electrical malfunction, usually a sensor problem. You need to have it checked for codes.
brake lights say lit after ignition has been shut off. lights shut off after hitting the brakes.
Check the fuses for your brakes.
No, if your brakes are flashingyou have crossed circuits.
There is no switch to activate or deactivate the brake lights on a 1988 Nissan. The brake lights automatically turn on any time the brakes are pressed.
IT'S PROBABLY JUST A PROBLEM WITH THE PRINTED CIRCUIT BEHIND THE DASH.
Check the 30 amp brake fuse (green) in the engine compartment fuse block.
every vehicle must have brake lights to indicate that the vehicle is stopping. with no brake lights the vehicle can cause a rear end collision.
check the fuse, brake lights have their own, & check the brake switch at the top of the brake pedal
check fluid level
I tried all the fuses, the parts that under the brakes I checked that. All lights come on and working except the brake lights no break lights.
Fog lights are in the front; they are commonly referred to as "brights" because they are the brighter of the two standard headlights. Brake lights are in the rear; they light up when pressure is applied to the brakes or when the car is in park or reverse.