If the turn signal is working it's either the brake light switch or the turn signal switch.
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
It is important to have working brake lights on a vehicle. If the brake lights are not working a person should first check the fuse, bulbs and at last the wiring.
Working brake lights are important for safety reasons while driving. It is important to check all of the wiring, if the brake lights are not working and the fuses and bulbs have been checked.
The brake lights and tail lights are separate wiring systems. Even some of the bulbs may have two separate bulbs in the same glass housing. If the bulbs are in fact working, then the next step would be to test the brake switch under the dash. When you depress the brake pedal the switch is pushed creating a connection to turn on the brake lights.
Bulbs blown, or corroded sockets.
Check the bulbs, the fuse and the brake light switch.
Check bulbs, fuse, brake light sensors.
Check the brake light bulbs, Check the brake light fuse, Check the brake light switch, In that order.
If the fuse is working, then check the bulbs.
How about a malfunctioning brake light switch
They are different sets of bulbs. You'll have to check the bulbs and wiring if necessary.
Possible bad switch on the brake pedal? When you push on the brake pedal, it activates a switch, that switch turns on your brake lights. If the bulbs and fuses are ok, check the switch with an ohmeter.
Bulbs blown/Brake lamp switch inoperative
Brake light switch on the brake pedal is defective
Your problem may be with any or all of these three items: The fuse, brake switch or bulbs in the brake lights.
bulbs or maybe your brake light switch is bad. otherwise, not sure.
Brake Lights not Stop Lights. Check your Fuses then the Bulbs. Hope This Helps.
Check the fuses and the bulbs.
on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights
Check the bulbs, fuse & brake light switch on the pedal.
Check bulbs, fuse, bad ground, brake light switch.
Check the fuse, check the bulbs and check the brake light switch.
Blown fuse, failed bulbs, bad switches, etc.
Bulbs may be burnt out.
try adjusting switch above brake pedal