Bad stepper motor in instrument cluster. Very common problem. Search for "speedometer whizard" in Google.
Check to make sure that the temperature sensor is good. A bad sensor is commonly the cause of the temperature gauge not working.
If the temperature gauge is not working, one thing it could be besides the gauge itself is a blown fuse. Another possibility is a loose or broken wire on the gauge.Ê
A common cause for a gas gauge to stop working in a 1994 Ford Aspire is a defective fuel gauge. Lose wiring in the dash is another cause.
The fuel gauge on a 1985 Chevy Silverado will read full all the time if the sending unit is defective or the wire has come loose. When the tank is full, the sending unit normally shuts off which cause the gauge to read full.
Could be temperature sensor Could be gauge
There are several reasons why a gas gauge could stop working. A short in the wire from the sending unit could be the culprit. The computer that controls the dashboard gauges could be going out.
Fuel [Petrol] Gauges that Fail to WorkAlthough there could be one or more other causes for a fuel/Petrol gauge to fail to work, the answer is YES, a "blown" fuse could cause the gauge to not work.
Probably the temp sending unit.
I have a 1999 s-10 my fuel gauge quit working I had to replace my fuel pump that fixed my proplem
could be a bad instrument cluster panel, they had a recall on the instrument cluster panel. I had my speedometer stop working and was given a price to fix it and blew it off. Then the recall came and I got a new instrument cluster and that fixed the problem which they knew they had.
There are several things that can cause your 2000 Hyundai gas gauge not to work. The most common cause is a loose or corroded ground wire.
There are several things that can cause your 2001 Ford F2 50 outside temperature gauge to quit working. The most common cause is a malfunctioning outside temperature sensor.
the problem could be that the enegn is jamed
are you sure you reconnected the wire to the gauge when you did the fuel pump? also the gauge requires a good ground to the tank. its possible you don't have a good connection. just some thoughts.
A low coolant level could cause the temp gauge not to read correctly. A faulty temp gauge sending unit could also be the cause. The coolant leak, you would have to find the source of the leak to determine the cause.
temperature gauge not working can be caused by a bad temp sensor in engine, a bad gauge in dash, or a bad fuse
If your gas gauge is not working on your 2000 Impala you need to take it in to a repair shop. There could be a fuse that needs to be replaced to prevent you from running out of gas.
Several things can cause the fuel gauge to stop working. 1.The sending unit in the fuel tank may be malfunctioning or broken. 2.There may be a broken, disconnected, or grounded wire going to the fuel pump/sending unit. 3. There may be a disconnected wire at the gauge cluster, or the gauge cluster itself may be malfunctioning.
The reason for the failure could be a failure in the connection or the gauge itself. Alternatively, the temperature sensor could have failed.
An inoperative temperature gauge will not alter how an engine runs, but the operator will not know if the water temperature has risen above normal without a properly working guage.
A faulty fuel gauge sending unit in the fuel tank could cause that.
It could be the fuse, but mine is because the floater that measures for the gauge is stuck.
fuel gauge not working
Chevy's are known for this problem, i just recently had the same problem and what you need to do is replace the fuel sending unit. My original problem had to do with my fuel pump not working and i wasn't really worried about the gauge but we figured since we had the tank down we might as well swap the sending unit and my gauge starting working. Good luck
Bad gauge Bad float in tank