Check the trans for codes with a scanner and diagnose the code you get.
turn the key on then off 2 times then turn on and check engine light will flash your codes. if you need to know what they are e-mail me firstname.lastname@example.org I will send them to you.
Have vehicle scanned to determine the problem and have codes cleared
With a scan tool.
go to auto zone to get your check engine light codes read. When it blinks that means there is more than one problem. Those codes will most likely help you figure out why your car is trying to die. I have a '98 Intrepid as well and the array of problems it has is amazing. Good luck...
Have the trans computer checked for codes, and ask a new question about the code you get.
Have vehicle scanned to determine the problem - most auto parts stores will do this free
you check the system for trouble codes.
To check engine light codes one would have to bring your vehicle to a mechanic who can use a computer to check the computer chip that regulates this function.
Auto Zone or Advance Auto Parts will check your codes for free.
Auto Zone will check your engine light codes for FREE...
Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.
P0700: EATX code present. You will need to check the transmission computer for codes.
You may think there is nothing wrong but there is. If the check engine light is on there will be codes stored in the ECM. Have the codes read. The codes will help you determine what the cause is.
I use a scan tool.
yes, and what codes are you asking about "check engine" or anti lock radio codes?
It requires a scanner to properly diagnosis a check engine light.
With a scan tool.
Check for trouble codes, check fuel pressure, check for spark,
OBDII vehicles are not programed to allow this feature anymore..since 1996 to present..scanners only... well i just turned the key off and on 3 times and it shows on the display at odmeter some codes, which i had to buy a book to understand what they mean I thought that you were referring to the Check Engine Light flashing the codes. What codes did you receive on the odometer?
Have vehicle scanned and codes cleared - usually a problem in the emission control system
you have to go to a autoparts that check and see what codes come up
cycle the key three times and count the blinks of the check engine light