put on a turbo
You should put 3 quarts of oil in your 1986 300zx Turbo and then let it run for 30 seconds. After that, check the oil level and fill it until the oil on the dipstick is level with the H.
turbo front cross member and turbo engine mount
There is no 1986 280zx. If it's a 1986 300zx then yes, but if you don't know enough about your car to know what model it is, you probably shouldn't be turboing it.
fit a twin turbo engine
Put the transmission in neutral or push the clutch in and then stop the car. When stopped, turn the ignition off.
You will have to do extensive Mods, and if you've never done anything like it, it will be VERY not-easy! dave
Yes you can, however it is only a minimal difference in performance and is very costly! I used to own a non turbo 1984 2+2, and it was a less than 10% add'l horsepower.
You can but I'd strongly recommend against it.
I have put this answer up many times. Go to DTAmotorsports an download you a free service manual. http://300zx-twinturbo.com/cgi-bin/manual.cgi
yes it will still mount the same. the motor mount are the same and same place throughout the 84-89 300zx turbo and non-turbo. but you will either have to take the alternator bracket of the 86 motor and put it on the left side of the 87 motor and take the right side alternator and bracket off or run the alternator wiring to the passenger side of the car.
try wiggling the steering wheel it has a lock on it
You can put a turbo on your nissan but have the psi turn down to 5 psi if everything is stock, you should be fine. Then you'll have more pick up but the problem is you'll have to make room for your turbo by removing your fans in front or find a place to mount your turbo.
Yes, with money everything is possible. The VG30DETT (top of the line engine in 300zx) has been put in several different Nissan car; and could be done in others.Easy ones: S13 (89-94 240sx), S14 (95-98 240sx), R32-34 (skyline gtst, gtr)Medium: Z33 (350z, G35)Hard: Nissan Micra, Pulsar, SentraAnything originally RWD will be easy, FWD HARD
I have put this link up many times. Go to DTAmotorsports download you a free service manual.
75W-90 GL-4. Redline MT-90 is the best but, you can use whatever you want
Yes of course. Look up the forums on how to install a turbo kit on a Nissan N13 Pulsar, which uses the same basic GM engine.
AnswerI'm pretty sure you can even fit a 300zx twin turbo engine (VG30dett)into your 240sx. Many people would perfer a skyline turbo/twin turbo engine(RB25det/RB26dett) though. All you need is lots of money and access to a shop to change your motor/transmition mounts, and cut off some stuff to make room. If you're interested, check this guy 1991 240sx with a skyline motor, and they may even help you with your 300zx engine if you contact them. http://www.mckinneymotorsports.com/projects.phpI'm positive you can put a vg30dett in a 240sx cuz people put ls1 corvette engines in them all the time my friend a has one with a ls2 in it
Remove steering wheel disconnect Quick Connects unscrew switch and pull out put back in same way
if it looks the same shape as the old one yes
21 / 10 rear 21 / 9 front exept if wide body kit used can go wider