answersLogoWhite

0


Best Answer

You do not "lube" the gasket with anything. If it is a flat paper gasket, you can use any shelac type sealer, but you don't have to as these will usually swell with contact with coolant and seal. If it is the kind that is a rubber ring around the thermostat itself, these require no sealant as pressure alone seal the housing to the motor.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What do you lube the thermostat gasket with?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do you need a thermostat gasket or just a housing ring when changing thermostat for 91 acura legend?

You should use a thermostat gasket along with the thermostat housing ring. The gasket should be replaced every time the thermostat housing is opened.


Where is the thermostat gasket in a Ford Escape?

in thermostat cover


Why is my 95 Monte Carlo leaking water from behind the thermostat?

thermostat gasket probably leaking. replace thermostat and gasket making sure that thermostat housing is flat.


What is the order of parts assembly for the thermostat on a Chevy 454. Thermostat first into the hole with spring up and the round rubber gasket on top of that with the neck on next?

The spring end of the thermostat goes into the engine. If you have the rubber ring gasket, the rubber ring has a slice on the inside of the gasket. Fit the rubber gasket around the outside of the thermostat before you set the thermostat in place. Be sure the thermostat and gasket are in place with the spring end facing the engine and install the thermostat housing, done.


Do you replace thermostat housing on 2002 ranger or just the thermostat?

Just the thermostat and the gasket.


How do you fix an antifreeze leak coming from the thermostat?

Replace the thermostat gasket.


What is the correct way to insert a thermostat on a 1997 Pontiac sunfire 2.2?

Remove the thermostat housing screws and separate the housing, exsposing the thermostat and coolant, remove old thermostat and gasket. Reinstall new thermostat, gasket and coolant.


Where is the thermostat located on a 96 Chevy Lumina 3.1?

the location of the thermostat is under the throttle body.before you put it back on you need to buy some gasket sealer or a gasket for the thermostat


Do you use gasket glue on both sides of the gasket on a thermostat?

You can, but if you have a new gasket glue is really not needed.


1995 Toyota pickup overheating?

Could Be head gasket or thermostat. That's what happened to me...Could Be head gasket or thermostat. That's what happened to me...


Cost of changing thermostat 1994 grand prix?

15.00. for gasket and thermostat


How do you replace thermostat on 1988 535i?

To replace the thermostat on a 1988 535i, first locate the top radiator hose and remove the end connected to the motor. Take out the old thermostat and use gasket cleaner to remove the old gasket. Then replace the gasket and thermostat exactly as it was when it came out. Tighten up the radiator hose over the thermostat.