Input Output Device. On a Chrysler product, IOD is for Ignition Off Draw.
Ignition off draw.
Check the fuse in the under hood fuse box labeled IOD.Check the fuse in the under hood fuse box labeled IOD.
Under hood fuse box.Under hood fuse box.
In my 2004 T&C it is a 20 amp fuse (Green) in the black box on the driver side front fender, It is labeled IOD. Normally in the under hood fuse box.
The ignition off draw fuse is located in the under hood fuse box. It is labeled IOD and will be inside a plastic holder.The ignition off draw fuse is located in the under hood fuse box. It is labeled IOD and will be inside a plastic holder.
Fuse box on the left side of the dash. Is labeled IOD.
This is related to the IOD fuse located in the fuse box under your hood.
The iod fuse is blown. That is in the under hood fuse box, it feeds the domelights, radio, etc..
A poor connection for the IOD fuse in the fuse box under the hood.
ThIgnition off draw, iod, fuse is missing or blown in the under hood fuse box.
In the underhood fuse block - blue 15 amp fuse labeled iod
The IOD fuse that is linked to the mechanical dashboard clock in a 2008 PT Cruiser is the yellow 20-amp IOD fuse.
The IOD fuse is on the left side of the fuse box under the hood, is a 15 AMP fuse. Without or blowed fuse, the radio would not work, power locks does not work, accessories light would not work. This information is for a 1999 Dodge Grand Caravan.
On a Dodge product the IOD fuse is for interior lights, radio memory,...........
Yes, so wdo just stand on engine fuse box.
under hood fuse box next to battery in box it will be bottom left The ignition off draw fuse powers the radio memory, the dome lights, etc
My door locks stopped working and I pulled the IOD fuse and reset it back after starting the vehicle. Now all locks work great to include the remote process. The IOD is mapped on the lid of the fuse box.
Does a 2000good f-350 super duty have an iod fuse and if so were is it located
It is located in the fuse box under the hood, on the fuse box lid it is a 15 amp fuse INT/LMP mine had some type of yellow puller or lock. I had a problem after replacing the fuse my vehicle runs like crap. I will reset the computer. Good Lock
body control module needs to be reprogramed with new udated software. i think you have to go to a dealershipIt is possible that the body controller (which handles the locks) has "lost its mind." You can reset it by removing its power for a couple minutes. This can be accomplished by either 1) disconnecting the battery (may reset some other settings of your vehicle) OR 2) pulling the IOD fuse in the fuse box under the hood (called the Integrated Power Module or IPM in the manual). I used this second method successfully after the power door locks just stopped working. The switch on the door wouldn't even operate the locks."To NON MECHANICAL PEOPLE LIKE ME: flip the fuse box lid for a map of the fuses. it's the one on the bottom right"I just reset my door locks by pulling out and putting back in the IOD fuse. The IOD fuse is mapped on the menu of the box lid. Hope this helps!AnswerSimply remove the IOD fuse for about ten seconds and replace it. The IOD fuse is located in the fuse box which is in the engine compartment on the driver's side. The inside of the fuse box cover shows the location/names/amps of the fuses. The 20amp IOD fuse is on the lower left corner of the fuse panel when looking at the panel from the driver side.Chrysler has released a software fix for the door locks on there vans. The dealer can flash the BCM to prevent this problem from reoccurring.
It stand for Screw Terminal (ST)
Ignition off draw
The IOD fuse feeds the interior lights, radio, and other interior items.
The Ignition Off Draw fuse feeds radio memory, interior lights and items such as power mirrors, etc