Misfire detected in cylinder #7.See related questins for more info.Misfire detected in cylinder #7.See related questins for more info.
Misfire on Cylinder #7
Cylinder #7 Misfire
Misfire on #7 cylinder.
this could be a bad plugwire or sparkplug or a bad coil for cylinder 7.
The engine cylinder locations are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front I'm not a mechanic / technician but your misfire could be caused by a bad sparkplug , bad coil , fuel injector not allowing the proper air / fuel ratio , and maybe there are other causes of your misfire
An engine cylinder misfire has been detected with the ( # 5 engine cylinder ) On a Ford Expedition ( 4.6 and 5.4 litre V8 engines ) firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
An engine cylinder misfire has been detected on the # 1 cylinder and the # 8 cylinder firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Ford Expedition
Type your answer here... An engine cylinder misfire has been detected in cylinder # 4 firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Ford Expedition
If you mean P0308 , engine cylinder # 8 misfire detected : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Ford F-150 ( V8 )
With multiple misfires originating from the same coil pack, my guess would be to replace the driver's side coil pack.
pull the plug and see if there is oil on the electrobs
Sons of Guns - 2011 Misfire 4-7 was released on: USA: 31 May 2013
An engine cylinder MISFIRE has been detected on the ( # 3 engine cylinder ) firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of 1998 Ford Crown Victoria ( 4.6 liter V8 ) ( I'm not a mechanic / technician but it could be the sparkplug , the individual coil for that engine cylinder , a problem with the fuel injector for that engine cylinder that is causing the air / fuel ratio to be incorrect , or maybe some other problem )
Check Coli, an wires attached to coli, coli my not be getting enough juice
A misfire has been detected in the #6 engine cylinder On a Ford Expedition ( 4.6 and 5.4 ) The engine cylinder locations are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
DTC (DIAGNOSTIC TROUBLE CODE) P0306 IS CYLINDER #6 MISFIRE, MEANING THAT CYLINDER IS NOT RUNNING, EITHER IT BE BECAUSE OF AN IGNITION FAILURE OR FUEL (FAULTY INJECTOR) OR A VACCUM LEAK AT THAT CYLINDER ========================================================= Just adding to the answer : On the Ford 6.8 liter gasoline V10 engine , the engine cylinder locations are numbered : 5 - 10 4 - 9 3 - 8 2 - 7 1 - 6 front of vehicle
Driver's side head front to rear is 1-3-5-7 cylinders. The other head front to rear is 2-4-6-8 cylinders.
the p0420 is a bad catalytic convertor, downstream oxygen sensor is switching too fast which causes code to set. p0300 is a random cylinder misfire. p0304 is cylinder #4 misfire, p0307 is cylinder #7 misfire etc. misfire codes are probably due to bad secondary ignition i.e. plugs, wires, cap, & rotor if it is not distributorless ignition. secondary ignition problems will also damage catalytic convertor quickly. (cat. will get too much cat food or fuel) DO NOT waste your money replacing downstream 02 sensor, it is working or else vehicle COULD NOT set this code!
Cylinder number 6 misfire. The cylinders on a Durango are numbered like this. Pass side 2-4-6-8 driver side 1-3-5-7
Spark plug, plug wire, distributor cap. Any one are more of what I have listed could cause a miss fire. #7 cylinder will be the last spark plug in the rear of the drivers side head. Didn't know if you new are not.
Ignition coil misfire cyl 7
location number 7 cylinder 5.7 hemi
P0316 - engine misfire detected at startup ( first 1000 revolutions ) P0303 - # 3 engine cylinder misfire detected The engine cylinder locations are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front I did a Google search on Ford trouble code P0316 and it seems like that one can come up on the Ford F-150 if it is humid / foggy / raining
The cylinder has a bad ring, is cracked or has a hole in it. In any case, your car is running on 7 cylinders which isn't good.