answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2007-09-28 01:53:24

Power to the pcm was lost or interrupted.Whenever your battery is disconnected to clear fault codes,code 12 remains in the computers memory,the code is erased automatically after 20-100 key on cycles depending on the year.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions


Nothing. All of the diagnostic codes consist of 2 digits. 'Code 3' must be incomplete.


Check tht injector wiring harness for loose and corroded connections.


Codes on a 1992 should be 2 digit in length.Codes on a 1992 should be 2 digit in length.


Codes on a 1992 should be 2 digit in length.Codes on a 1992 should be 2 digit in length.


Diagnostic code 44 means: Battery temperature sensor voltage out of range.


Fault code 16 means: Loss of battery voltage.


charging system excess or lack of field current


You don't really. That is, the memory capacity and function is restored when you restore power, but any information stored in memory is lost permanently.


buy a book like Chilton, and it has all the diagnostic codes listed in it. buy a book like Chilton, and it has all the diagnostic codes listed in it.


Trouble code P0720 means:Output speed sensor circuit malfunction


Under the hood, passenger side of firewall.



OK there are Three Engines in this truck.1992 DODGE TRUCKS DAKOTA 2.5L 4-cyl Engine Code [G]Engine, with WIX Filter 51085..........4.6 quarts [1]1992 DODGE TRUCKS DAKOTA 3.9L 6-cyl Engine Code [X]Engine, with WIX Filter 51085..........4.1 quarts [1]1992 DODGE TRUCKS DAKOTA 5.2L 8-cyl Engine Code [Y]Engine, with WIX Filter 51085 ..........5 quarts [1][1]. After refill check oil level.


Cylinder #8 misfire. Something is causing #8 to not fire properly, suggest you start with a tune up.


The plug-in for a code reader on a 1990 Dodge Dakota is located under the hood along the firewall.


In order to use a code reader on a 1992 Dakota simply plug it into the DLC outlet. From there, the code reader should properly function.


The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$


The fuse for the code reader plug on a 2001 Dodge Dakota is on the drivers side under the steering wheel by the emergency brake or clutch.


Code 41 is for the alternator not charging properly.


Trouble code P0700 means:Transmission control system malfunction


The trouble codes on an 1988 Dakota are two digit codes. Code 1 does not exist.


It means there was a fault detected in the MAP (Manifold Absolute Pressure) sensor electrical circuit. The cause may be a loose connection or broken or shorted wiring.


Trouble code P0304 means:Cylinder 4 misfire detected


Trouble code P0404 means:Exhaust gas recirculation circuit range/performance


Trouble code P0630 means:Vin not programmed or mismatch ECM/PCM



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.