If you are talking about the circuits load being to large for the circuits capacity, then the circuits over current or over load protection will come into effect. The fault will open the circuit, thereby isolating the load from the electrical supply source.
In a fused circuit, if the current becomes higher that the rating of the fuse, the circuit will open. The fuses link becomes hot under the influence of the higher current and melts. This melting of the link opens the circuit that the fuse is in.
things get hot, sometimes a fire
the current in series will be same..
A voltage error circuit is called an error amplifier and happens when there are discrepancies between the voltage output and the reference voltage. A current error circuit happens when there is a disruption of flow in an ammeter.
In this case current flows from a high voltage to a lower voltage in a circuit.
It is nothing but how much current or voltage taken in the circuit. It is known as Magnitude.
Because of fire
the current in series will be same..
Current flows
current remains same in series while divide itself in parallel circuit
When you add resistance to a circuit, current goes down. Ohm's Law: current = voltage divided by resistance.
A voltage error circuit is called an error amplifier and happens when there are discrepancies between the voltage output and the reference voltage. A current error circuit happens when there is a disruption of flow in an ammeter.
When the circuit is interrupted, the current stops flowing.
In a series circuit, if the current is broken the flow of all electricity stops.
If the circuit is closed the electric current will be closed as well.
When a electro magnet is formed
Then the current will stop flowing.
When a electro magnet is formed
The circuit current is interrupted and all the lights will go out.