0
Engages and disengages the compressor clutch as needed.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What does pressure cycling switch do?
The ac pressure cycling switch is designed to engage or dissengage the clutch to keep the proper pressure in the system.
Where is the low pressure AC cycling switch on a 97 Chevy Lumina 3.1?
The 1997 Chevy Lumina 3.1 liter low pressure air conditioning cycling switch can be found on the air conditioning compressor. The switch will be on the top of the compressor.
Where do you find the cycling switch on a 1986 town car?
The low pressure cycling switch is on the low pressure line coming from the compressor. Most of the time, it will be located on the reciever/dryer. It will have two wires coming from it. The low pressure line is the bigger line of the two.
Where is the ac clutch cycling pressure switch located on a 2000 Chevrolet Malibu?
It is on the acumulator.
What would cause your ac compressor to not come on in a 2000 Chevrolet Malibu and it is full of refrigerant?
Possibly the pressure cycling switch.
Where is the low-pressure cycling switch plug in a 1999 Chevrolet lumina?
On the top of the drier at the passenger side firewall Wrong the pressure switch is on the ac line under te air cleaner assl. There OS no drier on the fire wall it is before the switch .
Where is the low pressure cycling switch plug location on outside firewall or under dash of a 2000 Chevrolet Impala?
It is under the hood on the accumulator.
Why does a well pump keep cycling?
The pressure switch could be faulty, the pressure tank could be waterlogged, the pump intake could be at static water level. Call a well technician.
How do you replace the pressure cycling switch on a 1999 Chevrolet Blazer?
The system has pressure on it but the switch can be screwed off. A schrader valve prevents the loss of refrigerant. Install the new one after you have put some Air conditioning oil on the O ring seal.
Where is the air condition relay switch located in a 1991 Olds 98?
the relays are on the engine side firewall. The compressor relay signal comes from the main computer through the pressure cycling switch or switches.
Do you have to empty your air conditioning system to change your clutch cycling switch?
Yes you do, do not remove the switch with freeon in the system. must drain system down. It depends on the vehicle. Many (if not most) of the "clutch cycling" switches are actually simple pressure sensors and there is a schrader valve which will hold the pressure while you change the valve. A little more research is appropriate for YOUR vehicle before you decide what to do.
Where is the location of the AC low pressure cycling switch on a 1997 Monte Carlo?
Its on the a/c accumulator located on the drivers side better seen from under the vehicle.......
