Toyota Camry

What does abs stand for in your 1994 Toyota Camry?


Top Answer
User Avatar
Wiki User
2009-01-04 15:35:25
2009-01-04 15:35:25

Anti-lock Braking System.

User Avatar

Related Questions

is my car safe to drive if the break light and abs light is on in my 2007 Toyota Camry

The light is on usually because of damaged wiring or one of abs sensors is not working properly.

The Toyota Camry 2017 is loaded with safety features, which include air bags and ABS breaking systems, for the overall safety of your loved ones.

Likely a dirty abs sensor on one of the wheels

It is not as easy and it is probably necessary to get a manual on your car from AUTOBOOKSONLINE.COM.

Probably but it will mess up the ABS calibration and no telling what else. Stick with what came on the car.

Does 2003 toyota corola ce have abs brakes?

If you had new struts installed, they may have been installed improperly

ABS stands for Antilock Braking System. This applies to all auto manufacturers, not just Toyota.

Yes, there is an ABS light indicator in the 2004 Toyota Highlander model.

Acrylonitrile butadiene styrene

Bring to a shop that has an ABS scanner

It could, abs was an option.

No, it does not have ABS front or rear.

anti-lock brake system ABS

The ABS Light came up in my Toyota Alex car what should the Mechanic verify and replace

Hermann Josef Abs died in 1994.

It can be ABS system failure or sticky brakes. If it's ABS you have the ABS warning light on. If it's sticky brakes, you need to find out which part is failed. It's because of pads you need to replace them. If it's the caliper you can try to repair using high temperature grease. In the case when it did not help you need to replace the caliper.

ABS is the designator for anti-lock brake system

brake and abs light on , on 1994 Chevy Cavalier Z24

We have a 1995 Camry and the fuse box is located on the right handside if you stand in front of the car, you have to unscrew the bolts that hold the fuse box (its the one near the front of the car) and then turn if over you will find that the fuse has wires attached to it the same as the 100amp fuse in the front, then unscrew the bolts that hold the fuse in place and it should just come out by pulling on it. Hope this helps

The ABS Relay on the Toyota Rav4 is located on the driver's side of the vehicle on the panel to the left of the brake pedal. Look for a rectangular box that is either gray or black in color with an ABS sticker on it.

To reset the ABS and brake lights on a 2002 Toyota MR2, trying disconnecting the battery for 10 minutes. A Toyota dealer can also reset the lights.

There is a problem with the ABS. It can be many things and a professional is needed to diagnose the fault.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.