As far as I know, nothing. It is the color bands on the resistor that represent the value of the resistor.
AnswerIn the, now-obsolete, 'body-tip-spot' colour code system, the 'body' colour represented the first significant figure, the 'tip' colour represented the second significant figure, and the 'spot' colour represented the multiplier. The colours of the 'body-tip-spot' method correspend exactly to the colours used with the 'band' method.
With the 'body-tip-spot' method, the body of the resistor was painted in one colour; one end of the resistor (the 'tip') was painted another colour, and a coloured 'spot' or 'dot', was placed roughly halfway along the body of the resistor.
The same way he/she can identify a composite resistor that is color coded or a metal film resistor that is color coded: by reading the color code bands. They all use the same color code. If for some reason the color bands are damaged and unreadable, the resistor will have to be removed and measured with a meter. However this reading may be incorrect as whatever caused the color bands to become unreadable may have also damaged the resistor, changing its value. Verify the value on the schematic!
A 0.1 ohm resistor is color coded brown (1) black(0) silver (x 10-2).
Use the CSS declaration "background-color" For instance... <style type="text/css"> body { background-color: red; } </style> That code will change the background color to red. Background color will take the same values for a color as all other CSS color. A named color keyword, a hex RGB value, a decimal RGB value, and a decimal RGBA value.
<font style="background-color: red;">this text will have a red background</font>
bg color is the abbreviation of background color there is a command used in HTML which set the background color which u want
Equivalent Resistor
Type your answer here... u can c colored rings on resistor . The color of these rings is the key, follow a simple rule " Bad Boys Ravish Young Girls But Verginia Goes Willingly" initial letter of each word mentioned in above phrase represents a color & their sequence no. represents numerical value of that color ring.
The resistor color code use to help to identify the resistance of the resistor. There are four color in the resistor that help to identify the resistance of the resistor. The first and second color represent the numerical value of the resistor. The third color represent the multiplier. The four color represent the tolerance.
To change the color, you must type "color" followed by a number and a letter. The number represents the background color and the letter represents the text color. To view the available colors, enter "color g" into CMD. This will give you a list of the available colors for text and background and the letter/number that cooresponds. Decide what color combination you want and type the appropriate number and letter. For example, if you want red text on a purple background, you would type "color 5C" (because 5=purple and C=red).
The Finland flag is blue cross with white background. The white represents the white nights and snow of Finland, and the blue represents the sky and the lakes.
The color that represents laughter is the color yellow. The color red represents love and the color black typically represents death.
On a color coded resistor, there are normally four color bands. The first three represent the value of the resistor and the fourth represents the tolerance of the resistor, i.e. the acceptable variation as a percentage from the stated value. No fourth band allows +/- 20% Silver allows +/- 10% Gold allows +/- 5% Red allows +/- 2% Brown allows +/- 1%
The Orange Color represents the knowledge.
the color that represents to be organised is white
Resistor value is defined by the Resistance the resistor offers in Kilo ohms/ohms value given by color codes on the resistor.
The same way he/she can identify a composite resistor that is color coded or a metal film resistor that is color coded: by reading the color code bands. They all use the same color code. If for some reason the color bands are damaged and unreadable, the resistor will have to be removed and measured with a meter. However this reading may be incorrect as whatever caused the color bands to become unreadable may have also damaged the resistor, changing its value. Verify the value on the schematic!
Pink. That's the color that represents their party.