Oil cut is aÊmixture of oil, ground water and drilled mud that is recovered during oil exploration. Careful study of the composition of the mixture can determine what to expect ahead in the course of the drilling.
If someone is having a hard time don't make it worse for them.
control box , micropump, electric fuel cock, start valve, start cut out switch, starter generator, mini oil pressure switch, oil pressure transmitter and start card.
An early cut-off and a late cut-off are both involved with steam engines. A late cut-off delivers full steam pressure to move the piston through its entire stroke, so as to enable maximum start-up force. An early cut-off has greater thermodynamic efficiency but results in a lower mean effective pressure, which puts less force on the piston and is used for running the engine at higher speeds.
Clearly it means, "No more profits or monies to be gained by the Oil or Gas well", or B.P. would have shut the oil well down instead of letting it leak almost 2 Million Gallons of Oil to Leak into the Ocean.
It could be the reflection off of metal shavings that have worn off the gears.
The low oil cut off switch should be on the side of the oil pan. It is built into the oil pressure switch.
Cut; to cut down
(verb) 'to cut' = snijden (noun) 'cut' = snijwond
well to me the commercials say that they cut off in low oil but i would rather ask someone at the dealer ship
no old oil will not stop a car beacause at least the car has oil
you probably need to change the oil.
Cut the effected grass
It generally means that the cut is healing.
bi-sect
cut means same thing
Wrap area to be cut in tape, clap the hose in a vice, and cut using a hacksaw or cutoff wheel.
"Cut the ice" and, more commonly "Break the ice" mean "to initiate a conversation".