Press it and the horn will beep a few times. It helps to locate your car.
how do you program a keyless remote for a 94 Dodge Intrepid. I battery died and now the horn keeps going off
Behind the left headlamp
inside the driverside wheelwell, toward the front of the car
you have to resync the remote after changing the battery, stand next to car hold the lock and unlock buttons down for about 7 seconds or until you hear the horn chirp, thats it good luckSource(s):Impala LS owner
Press the horn button. If you mean for the door locks, hold the info and arrow button down together. There you will see the setup submenu.
First unlock and open the hatch, the horn alarm is now disarmed and you can unlock the driver side door.
Have to go into body computer with DRB3 to disable horn honk when locking vehicle.
See FOB Light(Remote Visiual Verification) on page 2-48 and FOB Horn(Remote Audible Verification) on page 2-49 of your "Owner's Manual" for details & programming options.....
To program the keyless entry remote you hold down the lock and unlock keys at the same time while within 10ft of vehicle to make sure you are within range of the remote for approx 10 seconds. the vehicle will alert with a short horn sound. if it does not respond, repeat. should only take 1-3 tries before it's done
remove the drivers side headlight. then find the manufacturer horn under the headlight frame towards the front of the wheel well. there you go. u now have access to remove and check your horn.
Try pressing the lock and unlock button together until you hear the horn beep once and that should work.
If the Montero's horn sounds continuously when doors are locked with the remote, this is due a horn pad failure. To repair, replace the horn pad assembly.