Chevy Celebrity

What does the timing need to be set on on an 88 Chevy Celebrity?

234

Top Answer
User Avatar
Wiki User
Answered
2010-02-06 16:17:43
2010-02-06 16:17:43

The 1988 Chevrolet Celebrity uses idistributorless ignition systems, the timing is controlled by the ECM. there is no provision for adjustment.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


The timing on y our 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.


The timing should be set to 10 degrees BTDC.


The 1988 Chevy Celebrity uses distributorless ignition. There is no provision to alter timing, the engine control module takes care of that.


The 1987 Chevy Celebrity has distributor less ignition. The timing is controlled by the engine control module and there is no provision for adjustment.


There is a big difference in how timing is set. We need to know what year.


The timing on a 2.8 V6 Chevy S10 needs to be set any time the valves, heads, or crankshaft are worked on. The gears of the timing chain and timing sprocket need to be aligned to set initial timing.


How do you set the timing on a 2000 Chevy blazer (V6)


To set the timing on a 1984 Chevy Celebrity with the V6 engine: 1. Disconnect the HEI connector so the engine will run in closed loop. 2. Start the engine and use an inductive timing light to check the timing. It should be at 100 before top dead center 3. If the timing is off loosen the clamp at the base of the distributor and turn the distributor so that the timing is set. 4. When you have set the timing tighten the clamp and verify that the timing did not change. If it stayed the same reconnect the HEI connector.


Timing on a 1987 thru 1990 Chevy Celebrity 2.8/3.1 engine is controlled by the ignition control module along with the engine control module. There is no provision or specification for manually adjusting the timing on these distributor-less models.


The only way to set the timing is with a OBDII engine scanner. You CANNOT use a timing light. The timing is computor controlled.


Need to KNOW the YEAR of the engine. And what it is in.


In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it


how do you set the timing for a 1997 Chevy 350 5.7 engine


how do i set the timing for a chevy 350 small block?


timing does not need to be set on the 1.3l engine in model year 1999 as it is a distributor less igniton system all timing is done by the ecm


That requires an engine scanner to set the timing.


The timing is computer controlled and there is NO need to fool with the timing as long as you have not moved or touched the distributor. It requires an OBDII engine scanner to adjust the timing.


How do you set timing on 1988-1995 Chevy Tahoe moters 5.7l?


how do you set the timing on a distriubtor for a 2002 Chevy blazer


how do you set timing on 2001 malibu 3.1


There is no timing to set. The timing is controlled by the ECM with signals it receives from various sensors.


The idle speed on a 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.


trying to set base timing on a 97 Chevy c1500 with a 5.7 engine the wire to disconnect to set base timing is ?


you cant set "timing" you have to have a scanner to set cam sensor to 0 +or-2


First place there is no need to set the timing if the distributor has not been moved. And there is no wire to unhook.The ignition timing is controled by the ECM / engine control module. If the timing is off you will have a check engine light on. If the light is not on, then the timing is correct. No need to bother, The computer is taking care of it.You have to have a OBD II engine scanner to set the timing.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.