If the parking/tailight fuse is good - then it may be a bad headlight switch No tail lights but the bulbs are working? Please explain.
That normally happens if one of your flasher bulbs is not working
They are different sets of bulbs. You'll have to check the bulbs and wiring if necessary.
look for a break in the wiring. it might be grounded on something
have you checked the bulbs and fuses
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
check your bulbs and fuses check your bulbs and fuses
If the fuse is working, then check the bulbs.
Working brake lights are important for safety reasons while driving. It is important to check all of the wiring, if the brake lights are not working and the fuses and bulbs have been checked.
if the bulbs are not bad, it is the fuse, if the fuse is good, its the wiring.
Turn left indicator signal flashes rapidly when I use indicator, bulbs ok, no lights working
Brake Lights not Stop Lights. Check your Fuses then the Bulbs. Hope This Helps.
Make sure parking/tail lights are working - if not, may be a fuse If parking/tail are working - may be bulbs or switch
Bad bulbs can be the cause of your reverse lights not working on your 1999 Toyota Tacoma. A problem with the reverse switch or bad wires can also be the cause of your reverse lights not working.
It is important to have working brake lights on a vehicle. If the brake lights are not working a person should first check the fuse, bulbs and at last the wiring.
Burned out bulbs?Blown fuse?Bad switch?
The brake lights and tail lights are separate wiring systems. Even some of the bulbs may have two separate bulbs in the same glass housing. If the bulbs are in fact working, then the next step would be to test the brake switch under the dash. When you depress the brake pedal the switch is pushed creating a connection to turn on the brake lights.
Bulbs blown, or corroded sockets.
If the back lights on a Peugeot 206 are not working, make sure the bulbs are new. If the bulbs are not the problem, there could be an issue with the fuse.
Blown fuse, failed bulbs, bad switches, etc.
Bulbs may be burnt out.
How about a malfunctioning brake light switch
Check bulbs Check fuses Check switch
Bulbs burned out?
Check the fuses and the bulbs.