What else could be wrong after replacing the driverside window regulator fuses and master power switch on a 96 Honda accord and still not work?
The power window motor could be bad.
Try replacing the master cylinder and slave cylinder cost under hundred, it's helped me before when my clutch stuck....However if that doesn't work then it may be the pressure plate which requires dropping the transmission... I have the same issue and am doing the process of elimination, just finished replacing the slave (cost me like $13), now I'm replacing the master cylinder (cost me like $41) but striped the bolt on the pipeline connected to…
The clutch parts that wear out would be the clutch master cylinder and the clutch slave cylinder. Replacing the clutch master cylinder requires disconnecting the hydraulic line, unbolting and removing the master from the vehicle, bench bleeding the new master, install the new master then bleeding the system. Replacing the clutch slave cylinder requires removing the transmission assembly. I would recommend purchasing a shop repair manual for that vehicle if you want to DIY.