answersLogoWhite
Chevy Blazer
Chevy Silverado
Chevy Blazer S-10

What fluid do you put into a 1985 Chevy blazer K10 4 speed 4x4?

123

Top Answer
User Avatar
Wiki User
Answered 2009-04-10 23:31:28

transmission- 80-90w gear oil

transfer case - atf tranny fluid

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions



The overall length of a 1985 Chevy Blazer is 4,712 mm or 185.5 inches. Its curb weight is around 2075 kg.


Through the filler pipe at the right rear of the engine. Check it when hot, with it on level ground and don't overfill it


I need to know fluid type speccifications for manual transmission Chevy 1985 s-10 5spd Chevy 1985 s-10 what type of manual transmission fluid


The transfer case fluid on a 1985 Chevy Suburban should come to the bottom of the filler hose. It must be on a level surface to accurate measure fluid levels.


check your regulator. it maybe over charging your battery




The 1985 Chevrolet S10 Blazer has a curb weight of 4,462 pounds. The standard fuel tank capacity for this vehicle is 24.83 gallons.


Its mounted on pulley system on t besi he front of the engine opposite the alternater for k5 blazer 1985 an in the same place from 79 to 87 years


I have a Chevy 350 from a 1985 blazer in my 1990 wrangler. So yes it is. I also have the transmission and transfer case from it in my jeep to.


The curb weight of the 1985 Chevrolet Blazer is listed as 3760 pounds. The curb weight does not include any fluids or accessories.


what is the wheel base for 1985 s10 blazer


It already has throttle body fuel injection.


The 1985 Chevrolet have blazer tail light fuse can be found in the fuse box. The fuse box is located beneath the drivers side dashboard.



You can put any SAE certified transmission fluid in the transmission of your 1985 five-speed Chevette. The transmission holds nine quarts of fluid.


4 speed manual core is about 100 bucks


over charging or bad bearings its about to let you stranded change it



Up front, under the power steering pump, not easy to get to.



inside driver frame rail under driver seat



No, you can't. transmissions bellhousing is different in 60° V6 and L4



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.