The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.
Because this bulb is mounted vertically, it can be tricky. The recommended method is to remove the license plate and open the trunk lid.
next to the battery box
you can find the horns in the grille.both opposite side of the license plate.
If my memory serves me correctly, it opened -- as a tent -- in 2003.
# Remove the license plate. ## Remove the screws from the license plate lamp. # Remove the license plate lamp from the end gate. # Remove the license plate lamp socket, turning counterclockwise. # Remove the bulb from the license plate lamp socket. ## Install the bulb to the license plate lamp socket. # Install the license plate lamp socket, turning clockwise. Notice:Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.# Install the license plate lamp to the end gate. TightenTighten the screws to the license plate lamp to 2 N·m (18 lb in). # Install the screws to the license plate lamp. # Install the license plate.
Discription of fuse box in 2001 Porsche boxter
break the glass take out the bulb and put the other one in
Easiest way: go to Autozone, they'll put it in for you. No extra charge.
there should be little screws that you screw out and they pop out and you twist the bulb to remove it