The average of 34/44 is 77%. What grade that is depends on what basis your school has set grades. Some schools or classes would say that is a C or C+.
B, B+ if the teacher is generous and rounds it up
its is a 73 d
77.4% or C+
65.4% or D
69.7% or D+
82.5% or B-
75 percent
74.4% or C
B- or B+
75% or C
15w-40 in summer and 10w-30 in winter
Petrol engines cold climate 5W/30 moderate climate 10W/30 alternate grade 10W/40 hot climate 20W/40.
Bmw 320d e46 recommended oil grade is 5w 30
40 out of 50 is 80%. The grade which this represents will depend on grade boundaries which, in turn, will depend on the standardising procedure.
19 WHAT GRADE ARE YOU IN!?! COLLAGE!!!!!!???????! qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwweeeeeeeeerrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrttttttttttttttttttttttttttttttttttttttttttttttttttttyyyyyyyyyyyyyyuuuuuuuuuuuuuuuuuuuuiiiiiiiiiiiiiiiiiiiiiiiiooooooooooooooooppppppppppppppplllllllllllkkkkkkkkkkkkjjjjjjjjhhhhhhhgfggggggggggggddddssazzzzxxxxxxxxxxccccccccccccccvvvvbbbbbbbbnnnnnnnnnnnnnnnnnnnmmmmmmmmmmmmmm,,,,,,,,,,,,,,,,,,,,;'''''''''''''''''''''''''';/
sae document j300 defines the highest single grade as 60. this is in reference to viscosity and not the quality of the oil
A 10W-30 or 10W-40 should be fine.
BMW 318 (E36) & (E46) cold climate 5W/30 moderate climate 10W/40 alternative grade 10W/60 synthetic hot climate 15W/40.
if need yo get grade c for maths higher you will need 30-40 marks
30% of 40 as a fraction = 12/1 30% of 40 = 30% * 40 = 30%/100% * 40 = 12/1
Grade 60 has a tensile stress of 60000 psi while Grade 40 has 40000. Grade 60 steel rusts faster than grade 40. grade 60 bar can be identified by the word 60 which should have printed on that while on grade 40 no no will be printed or written and we can identify this by counting the lines on steel as well. If there are 3 lines longitudinally on the bar its is of 60 grade and if 2 lines longitudinally it will be identified as 40 grade.