answersLogoWhite

0

Still have questions?

Related Questions

Which parameter if set incorrectly will prevent a computer from communicating with any other computer within the same subnet?

The IP address.


How does a virtual lAN allow devices to be grouped?

Devices in the same VLAN are part of the same subnet, or "group". (The fact of belonging to one VLAN or another is, to a certain degree, independent of the physical location, thus the name "virtual".)Devices in the same VLAN are part of the same subnet, or "group". (The fact of belonging to one VLAN or another is, to a certain degree, independent of the physical location, thus the name "virtual".)Devices in the same VLAN are part of the same subnet, or "group". (The fact of belonging to one VLAN or another is, to a certain degree, independent of the physical location, thus the name "virtual".)Devices in the same VLAN are part of the same subnet, or "group". (The fact of belonging to one VLAN or another is, to a certain degree, independent of the physical location, thus the name "virtual".)


What is a subnet in computer networks?

A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet mask.


How do an IP address and its subnet mask function together?

The subnet mask - expressed in binary - starts with a number of ones, followed by zeros. If (for example) the subnet mask is 255.255.255.0, this can also be written as /24 - that means that the first 24 bits are ones. In this example, that means that the first 24 bits of the IP address (in this case, exactly 3 bytes) are shared by all devices in the same subnet. So, if your IP address is 200.3.85.7, and the subnet mask is 255.255.255.0, all other computers in the same subnet will also start with 200.3.85.


Is 192.168.12.8 and 192.198.12.65 in the same subnet?

No. 192.168.12.1 - 192.168.12.254 is one subnet (assuming 255.255.255.0 subnet mask)


What must be configured the same in each node that resides in a LAN Segment?

The subnet mask must be the same for all devices in the same LAN segment. The IP addresses must be unique (different). Also, the default gateway address is usually the same for all devices in the same LAN segment.


2 different subnet masks can be used on 1 subnet?

No, all subnets must use the same subnet mask


Should computers on a network have the same subnet mask?

Subnet mask defines our network bit . If we are using a single network then all computers should have same subnet mask as well as the ip address, that belongs to the same network id.


The default gateway is not on the same network segment subnet that is defined by the IP address and subnet mask?

Yes, it must be on the same network segment or you won't be able to route a packet outside of your network segment. --- In simple home networks, the default gateway will be within the scope of the subnet mask. Some devices will enforce this (artificial) requirement. But it's entirely possible to engineer a network with a gateway that is not within the scope of the subnet mask (if the device will allow it). Image two logical networks that run on the same physical network. It's just not a common configuration.


Find out another pc's subnet mask?

If the other PC is on the same LAN segment then it will have the same subnet mask as yours. A subnet mask is the same for all subnets within a network so that will be the same as well. For other networks it isn't important to know what their subnet is. You could always ask the other user to find out that information if you needed to know.


What happens if two devices have the same scsi id assigned?

. goodbye.


How do subnet masks indentify that a network has been subnetted?

If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.


Can two Wifi devices communicate directly with each other via WLAN or do they need a router?

Yes, they can. You might want to assign IP addresses manually. They should be in the same subnet.


Is a subnet mask the same as netmask?

YES! netmask is just another way to say subnet mask. crazy but confusing.


Ate these two computers on the same network IP192.167.222.4 Subnet255.255.555.0 Gateway192.168.222.1 and IP192.168.222.6 Subnet255.255.0.0 Gateway192.167.222.1?

For a start, two computers on the same network should have the same subnet mask. If two computers that are indeed on the same network have different subnet masks, there is a design problem. Now, even if you look only at the last subnet mask - the least restrictive one - the computers are NOT on the same subnet mask. The subnet mask 255.255.0.0 indicates that the first two bytes (or the first 16 bits) of an IP address have to match, to be considered part of the same network. If you look at the IP addresses, this is not the case.


What is a subnet mass?

An area of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices whose IP Addresses have the same prefix. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet mask.


What must TCP computers on the same network have?

They must be in the same network and have the same subnet mask.


What happens when you go back out with the person you love and it doesn't feel the same?

Then either you two are communicating well or the relationship isn't meant to be.


Do the servers and the workstations share the same network portion of IP address as your workstation?

Servers and workstations Êcan share the same subnet ( a network portion of IP address). However, it is recommended you use different subnetsÊwhen there are several network devices.


A computer with a host IP address of 10.10.5.1 sends a data packet with a destination IP address of 10.10.5.2 A subnet mask of 255.255.255.0 is being used Determine whether the packet stays in the?

255: 1111_1111 5: 0000_0101 1: 0000_0001 2: 0000_0010 Source IP address: 10.10.5.1 Subnet mask: 255.255.255.0 Subnet: 10.10.5.0 (host subnet) Destination IP address: 10.10.5.2 Subnet mask: 255.255.255.0 Subnet: 10.10.5.0 (destination subnet) The destination subnet address for 10.10.5.0 which is the same subnet as the host. Therefore, the packet stays in the LAN.


The default subnet mask for the host IPv4 address 123.232.203.145 is?

The default subnet mask for this address - a class A address - is 255.0.0.0 (same as /8).


What is subnet address?

subnet addresing allow an autonoumous system made up of multiple n/w to share the same internet address.


Can two system have same ip address in a same network with different subnet mask?

If u r gving a different subnet mask that means its a different newtwork itself. so its possible


What kind of IP addressing is needed to prepare a computer to serve up remote desk top?

The settings below is the most simplistic network configuration required for two devices to communicate with each other on an IPv4 TCP/IP network, assuming that IP addresses 10.1.1.11 and 10.1.1.12 are available for use: Device-A IP: 10.1.1.11 Subnet Mask: 255.255.255.0 Device-B IP: 10.1.1.12 Subnet Mask: 255.255.255.0 This will put both devices on the same subnet which will allow them to communicate with each other. You can set the .11 and/or .12 number to any unused IP address.


You need to extend your office network but you cannot run new cable in the area Devices should be addressed as part of an existing subnet that is wired as 10BaseT What should you do first?

You left out the options from the CompTIA Network plus exam.The options are:Deploy a basic firewall - this would only help increase security and not extend your networkDeploy a router - this would allow you to have a second network with a different subnet, but would not help you extend the networkDeploy a bridge - this would help you join two dissimilar network technologies for the same subnet, but since you cannot run new cable in the area you would not be able to connect more devicesDeploy a wireless access point - this option would allow you to extend your office network without running new cables and address the devices in the existing subnet.