Check for power to the reset button in and out when reset-
The reset button for the fuel pump inertia switch should be DOWN , if the button has popped up there is no power going to the electric fuel pump and the switch needs to be reset by pushing the button down
Yes , if the button has popped up then no power is going to the electric fuel pump , and the switch would have to be reset by pushing the button DOWN
The fuel system is pressurized on fuel injected engines. If you were in an accident and the fuel pump still running, it could spray out fuel and feed a fire. The fuel reset switch detects a sudden jolt (hard!) and trips. You just reset it by pushing the button on top. On my 99 B3000, its on the firewall under the glovebox, and has a red top. HTH
On a 2000 Ford Expedition : The fuel pump shut off switch ( inertia switch ) is located in the front passenger foot well , by the kick panel * the reset button is on top of the switch and if the button has popped up then no power is going to the electric fuel pump and needs to be manually reset by pushing the button down
There is not a reset button.
Where is the reset button for the fuelpump on an expedition
There is no reset button for fuel. Ford has them but not Chrysler products.
This vehicle is not equipped with a fuel pump reset button.
The Mazda Protege fuel reset button can be found on the firewall in the engine compartment. The reset button will be in the middle of the firewall.
A 1995 Jeep does not have a reset button.
there is not a reset button.
Dodge does not have a reset button.